NZXT H9 Flow RGB+ White

88,890 Ft

NZXT H9 Flow RGB+ White

The NZXT H9 Flow RGB+ PC case in white provides the foundation for building high-performance systems with a focus on cooling and a clean design. The Midi Tower construction uses a dual-chamber layout, which separates heat-intensive components from the power supply and cabling. The spacious chassis is ready for the installation of demanding components and can also accommodate graphics cards of above-standard length. The airflow system enables the installation of large water-cooling radiators. 

PC case

Midi Tower

Size
PC case

165mm

Maximum CPU cooler height
PC case

459mm

Maximum graphics card length
PC case

7×

Number of installed fans
PC case

10×

Number of fan positions
NZXT H9 Flow RGB+ White PC case

Key features of the NZXT H9 Flow RGB+ White PC case

  • Dual-chamber layout separates heat sources from other components
  • Tempered glass panels offer a clear view of the interior
  • Supports motherboards with rear-facing connectors
  • Includes two F420 RGB Core units and one rear fan
  • Top and side positions accommodate large radiators
  • Perforated panels ensure high airflow
  • NZXT Control Hub unifies cooling and lighting management
NZXT H9 Flow RGB+ White PC case

Frameless glass and dual-chamber construction of the NZXT H9 Flow RGB+

The tempered glass panels connect seamlessly at the corner to create a clean, panoramic view of the interior. This solution provides an uninterrupted panoramic view of the installed hardware inside the main chamber. The clean lines of the glass complement the overall aesthetics of the build and make the component lighting stand out. The steel construction of the rest of the case ensures the necessary strength and stability for the entire system. A vertical partition divides the internal space into two separate zones, which contributes to better organisation and thermal comfort. The main chamber hosts the motherboard with the processor and graphics, while the second chamber hides the power supply and storage drives. This layout simplifies cable management and prevents heat from accumulating in one part of the case. The design ensures direct airflow to key components for maximum cooling efficiency.

NZXT H9 Flow RGB+ White PC case

High airflow and pre-installed F420 cooling

The manufacturer has designed the panel perforations to maximise fresh air intake to hot components. The entire top wall and side panel use a fine mesh for effective ventilation, which works with the installed fans. The system draws cool air from the bottom and side, while the heated air naturally rises up and out of the case. This solution maintains low temperatures even under high CPU and graphics card load. The package includes two F420 RGB Core units, each integrating three 140mm fans into a single frame. These fans provide high static pressure and airflow, and their installation is very easy thanks to the common frame. There is another 120mm fan at the rear for heat extraction. The user gets a strong cooling foundation right out of the box. 

NZXT H9 Flow RGB+ White PC case

Water radiator support and motherboard compatibility

For liquid cooling enthusiasts, the NZXT H9 Flow RGB+ PC case provides superior options for mounting heat exchangers. The top and side positions can accommodate radiators up to 420mm long, enabling the installation of powerful AIO coolers or custom loops. The bottom position also supports radiators up to 360mm. This flexibility allows for cooling even the most demanding processors on the market with plenty of headroom. Maximum visual cleanliness of the interior is ensured by full compatibility with motherboards featuring rear-facing connectors, such as ASUS BTF and MSI Project Zero. Using a motherboard with rear-facing connectors concentrates all cabling in the secondary chamber and accentuates the minimalist look of the build. Of course, support for common formats from Mini-ITX to E-ATX is also included. The wide compatibility enables the installation of any platform, entirely according to the build's requirements.

NZXT H9 Flow RGB+ White PC case

Space for graphics cards and cable management

Gaming enthusiasts will appreciate the huge space for a graphics accelerator, which can be up to 459mm long. This figure guarantees trouble-free installation of the most powerful current and near-future cards. Even with a radiator installed in the side position, there is still plenty of room for long cards. Vertical card mounting is possible with the purchase of the corresponding accessory, which expands the hardware presentation options. The second chamber contains wide channels and pre-prepared clips to ensure easy routing of all cabling. Integrated hook-and-loop straps keep cable bundles in place and simplify the overall PC building process. The sufficient depth behind the motherboard provides maximum freedom for cable organisation and speeds up the entire assembly. The result is a clean interior that does not obstruct airflow. 

Drive bays and front panel connectivity

Data storage has its own dedicated space in the hard drive cage and on mounting trays. The NZXT H9 Flow RGB+ PC case can accommodate a total of two classic 3.5" hard drives and four 2.5" SSDs. The hinged mechanism of the drive caddy makes access and installation easy. This capacity is fully sufficient for a combination of fast system drives and large-capacity data storage. The control panel located on the top provides quick access to all necessary ports. The equipment includes two USB 3.2 Gen 1 Type-A ports and one high-speed USB-C Gen 2×2 for lightning-fast data transfer. Connectivity is rounded off by a combined 3.5mm audio jack for connecting a headset. The layout of the connectors meets current demands for ergonomics and accessibility. 

NZXT H9 Flow RGB+ White PC case
NZXT H9 Flow RGB+ White PC case
NZXT H9 Flow RGB+ White PC case
NZXT H9 Flow RGB+ White PC case

Motherboard formats

  • ATX
  • mATX (Micro ATX)
  • mITX (Mini ITX)
  • E-ATX (Extended ATX)

Fans

  • Rear fan size: 1× 120mm
  • Bottom fan size: 3× 120mm or 3× 140mm
  • Front fan size: 3× 140mm or 3× 120mm
  • Top fan size: 3× 120mm or 3× 140mm

Ports

  • USB 3.2 Gen 1
  • USB-C
  • 3.5mm combo audio jack

Specifications

Usage and size

Size Midi Tower
Location Freestanding

Colour

Colour White

Internal structure

Motherboard form factor ATX, mATX (Micro ATX), mITX (Mini ITX), eATX (Extended ATX)
Number of internal 3.5" slots 2×
Number of internal 2.5" slots 4×
Max. processor heat sink height 165 mm
Max. graphics card length 459 mm

External structure

Front panel location top
Front panel connectors USB 3.2 Gen 1, USB-C, 3.5mm jack (mic/headphones), USB 3.2 Gen 2x2
Sidewalls Transparent
Side panel material Tempered glass
Door Glass

PSU

Power supply Without power supply
Supported PSU format ATX

Cooling system

Front fan size 3x120mm, 3x140mm
Rear fan size 1x120mm
Top fan size 3x120mm, 3x140mm
Bottom fan size 3x120mm, 3x140mm
Supported radiator size on top 120mm, 140mm, 240mm, 280mm, 360mm, 420mm
Supported radiator size from the front 120mm, 140mm, 240mm, 280mm, 360mm, 420mm
Supported radiator size from below 120mm, 140mm, 240mm, 280mm, 360mm

Backlight

Backlight colour ARGB

Material

Wardrobe material Steel

Dimensions

Width 315 mm (31.5 cm)
Height 506 mm (50.6 cm)
Depth 481 mm (48.1 cm)
Weight 13.4 kg
Code:  CBh9fa5
Warranty: 24 months
Links: Producer's Website:
Manufacturer information

NZXT Europe GmnH, Ammerthalstrasse 32, 85551 Kircheim Bei , Munchen, Germany [email protected]

Show more

Related categories

Chcete doručit zboží do Česka? Prohlédněte si NZXT H9 Flow RGB+ White
Chcete doručiť tovar na Slovensko? Prezrite si NZXT H9 Flow RGB+ (2025) White
Für Versand nach Deutschland, besuchen Sie bitte NZXT H9 Flow RGB+ (2025) White
Für Versand nach Österreich, besuchen Sie bitte NZXT H9 Flow RGB+ (2025) White