KochChemie MICRO CUT FINISH P3.01 250ml

Car & Moto Car Cosmetics Exterior Paint Polishing & Correction Polishing & Grinding Pastes

4.8 6 rating

8,190 Ft

Micro-abrasive paste KochChemie MICRO CUT FINISH P3.01 belongs to the offer of quality car cosmetics from the German manufacturer Koch-Chemie. It is a state- of -the-art, final polishing paste with microparticles , intended for machine polishing, up to a grain size of 3000 abrasive paper. The micro-abrasive paste contains carnauba wax and non-volatile silicones. This allows you to preserve the paint for a long time and at the same time a brilliant, high-gloss finish and smooth the surface, even in dark shades and under extreme light conditions. It is suitable for all types of paints, including those resistant to scratches. Ideal for permanent, mechanical removal of holograms, fine scratches and polishing marks.

KochChemie MICRO CUT FINISH P3.01

Quality representative of German car cosmetics brand KochChemie
Micro Cut Finish P3.01 abrasive paste for machine polishing with microparticles
Allows machine polishing up to 3000 grain sandpaper
Micro-abrasive antihologram polish with carnauba wax and non-volatile silicones
Micro Cut Finish P3.01 treatment ensures long-term preservation of the paint
Polish for high gloss and perfectly smooth surface even in dark and sensitive shades
Car cosmetics for removing holograms, fine scratches and polishing marks
KochChemie polish suitable for all types of paints, including durable

Field of application:
Varnishes for cars, commercial vehicles, motorcycles ...

Degree of grinding:
3.2

Gloss level:
9.5

Method of use:
Shake well before use and test its suitability and tolerability. Wash the surface to be treated and allow to dry completely. Apply the polish evenly on the dried or new polishing wheels, evenly over the entire surface of the wheel. Leave the polisher still switched off and spread the polish over the paint in a thin layer. Then use a rotary polisher to polish crosswise and at medium pressure until a transparent film is formed (until the alumina contained in the polish is completely broken). Do not use the polishing discs used on this product for other products. Use a professional microfibre cloth to remove polish residue without scratches or scratches. Protect from frost and excessive heat. Do not use on hot surfaces.

Tip:
For optimum results, the manufacturer recommends the use of a KochChemie Micro Cut Pad (violet) and an eccentric sander with forced rotation (eg. Makita PO5000C, highest speed). Alternatively, a rotary polisher can be used to polish surfaces in combination with the KochChemie Micro Cut Pad.

Choose the optimum grinding paste packaging:
Micro-abrasive paste KochChemie MICRO CUT FINISH P3.01 - volume 250 ml
Micro-abrasive paste KochChemie MICRO CUT FINISH P3.01 - volume 1000 ml