KochChemie MICRO CUT FINISH P3.01, 250ml
KochChemie MICRO CUT FINISH P3.01, 250ml
KochChemie MICRO CUT FINISH P3.01 micro-abrasive polish is part of the high-quality car care range from the German manufacturer, Koch-Chemie. It is a state-of-the-art final finishing polish with micro-particles, designed for machine polishing, effective up to a 3000 grit sandpaper finish. The micro-abrasive polish contains carnauba wax and non-volatile silicones. This ensures long-lasting paint preservation while achieving a radiant, high gloss and a smooth surface, even on dark shades and in extreme light conditions. It is suitable for all types of paintwork, including scratch-resistant ones. It is ideal for the permanent, mechanical removal of holograms, fine scratches and polishing marks.
Key Features of KochChemie MICRO CUT FINISH P3.01 Car Care
- A high-quality product from the German car care brand KochChemie
- Micro Cut Finish P3.01 abrasive polish for machine polishing with micro-particles
- Enables machine polishing up to a 3000 grit sandpaper finish
- Micro-abrasive anti-hologram polish with carnauba wax and non-volatile silicones
- Treatment with Micro Cut Finish P3.01 polish guarantees long-lasting paint preservation
- Polish for a high gloss and a perfectly smooth surface, even on dark and sensitive shades
- Car care for removing holograms, fine scratches and polishing marks
- KochChemie polish suitable for all types of paintwork, including scratch-resistant ones
Field of Application:
Paintwork of passenger cars, commercial vehicles, motorcycles.
Cut Level:
3.2
Gloss Level:
9.5
Directions for use:
Shake the product well before use and test for suitability and compatibility. Wash the surface to be treated and allow it to dry completely. Apply the polish evenly to the entire surface of a dry or new polishing pad. With the polisher still switched off, spread the polish in a thin layer over the paintwork. Then, using a rotary polisher, polish with crosswise movements and medium pressure until a transparent film is formed (until the aluminium oxide contained in the polish has completely broken down). Do not use polishing pads used for this product with other products. To remove polish residue without scratches or streaks, use a professional microfibre cloth. Protect from frost and excessive heat. Do not use on hot surfaces.
Tip:
For an optimal result, the manufacturer recommends using the KochChemie Micro Cut Pad (purple) and a forced rotation eccentric polisher (e.g. Makita PO5000C, highest speed setting) for polishing. Alternatively, a rotary polisher in combination with the purple KochChemie Micro Cut Pad can be used to polish surfaces.
Choose the optimal size of abrasive polish:
KochChemie MICRO CUT FINISH P3.01 Micro-Abrasive Polish – 250ml
KochChemie MICRO CUT FINISH P3.01 Micro-Abrasive Polish – 1000ml
Specifications
Use
Volume
Use
| Code: | AUPR21574 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
eko GRADO spol. s r.o., Skyřická 110,43401 Most, [email protected], +420723691602 
|