K2 BLUE+ anti-crystallisation additive for AdBlue, 50 ml
K2 BLUE+ anti-crystallisation additive for AdBlue, 50 ml
K2 Blue+ SCR additive is a modern supplement to ADBLUE (K2 Euroblue), designed for owners of vehicles with diesel engines and selective catalytic reduction (SCR) systems. Thanks to its innovative formulation, it effectively minimizes the risk of crystallization of ADBLUE and protects the system from malfunctions, allowing for long-term and trouble-free operation. Preventing crystallisation is essential to ensure the SCR system functions properly, meets emission standards and avoids costly repairs. You can prevent AdBlue crystallisation by regularly using ADBLUE additives (e.g. K2 Blue+) to prevent crystal formation and regular servicing of the SCR system, including cleaning of injectors and checking the condition of the pump and hoses.
Key features of BLUE+ Anti-crystallisation additive for AdBlue, K2, 50 ml
- Reduces the risk of deposits and clogging of components, a common problem with ADBLUE systems
- Extends the life of key components such as injectors and pumps, leading to lower repair costs
- Promotes effective reduction of nitrogen oxides, helping to meet strict emission standards and care for the environment
- The additive should be applied each time the ADBLUE solution is refilled to ensure reliable protection of the system
Who is the K2 Blue+ for?
It is a product designed for both car, van and truck owners.who want to ensure maximum efficiency and reliability of their SCR systems. If you are looking for the best ADBLUE supplement to prevent problems and extend the life of your system, K2 Blue+ will meet your expectations. The ADBLUE crystallization problem is based on the formation of hard deposits in the SCR (Selective Catalytic Reduction) system. This is due to the specific composition of ADBLUE, an aqueous urea solution.
The main causes and consequences of the crystallization problem are:
Evaporation of water: ADBLUE contains about 32.5% urea and 67.5% water. If the water evaporates, the urea can precipitate as crystals.
Low temperatures: At temperatures below -11 °C, ADBLUE begins to freeze, which promotes crystal formation.
Residual fluid: Leaving small amounts of ADBLUE on system components such as injectors or hoses can lead to crystallization as the water evaporates.
System malfunction: A damaged or clogged ADBLUE injector may cause insufficient atomization of the solution, which promotes the formation of deposits.
Effects of ADBLUE crystallisation
Clogged injectors and lines: Urea crystals can block the flow of ADBLUE and prevent the system from functioning properly.
Damage to the pump and sensors: Clogging can lead to overloading of the ADBLUE pump and damage to the liquid level sensors.
Reduced efficiency of the SCR system: Crystallisation on the SCR system reduces its effectiveness in reducing nitrogen oxides (NOx).
Costly repairs: Cleaning or replacing damaged SCR system components such as injectors, pumps or catalytic converters is often expensive.
Storage:
Store ADBLUE properly between -5°C and 25°C to prevent freezing or overheating.
Use:
Pour into the urea container at a ratio of 50 ml per 20 l, mix thoroughly, add to the SCR dosing system
Warning:
Keep out of reach of children.
Specifications
Volume
Usage
Season
Type
Features
Dosage
| Code: | AUPR120289 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
Melle Sp. z o.o., Stary Staw 9, 63-400 Ostrów Wielkopolski, PL, [email protected] 
|