tesa Adjustable adhesive nail for tiles and metal 4kg
tesa Adjustable adhesive nail for tiles and metal 4kg
The Tesa adjustable adhesive nail – a practical and convenient solution for your home. If you need to hang something on a wall but aren't sure how, try the TESA adjustable adhesive nail, which is suitable for tiles and metal. The nail is easy to apply and can be used immediately. The pack contains two nails, each holding up to 4 kilograms. Thanks to Powerstrips technology, you can remove the nail from the wall without leaving any marks behind. If you want to move it to another location, simply buy the corresponding replacement adhesive strip. They are suitable for smooth, solid indoor surfaces like tiles. For objects up to 4kg per nail, or 8kg when using two nails. They can be reused with a new strip.
Key features of the Tesa adjustable adhesive nail for tiles and metal, 4kg
- Reusable
- Suitable for tiles and metal
- 2 nails per pack
- Easy installation without drilling
- Powerstrips technology for easy, damage-free removal
- The Tesa nail holds up to 4kg (up to 8kg when using 2 nails)
How to use the Tesa adjustable adhesive nail
The product is easy to attach, remove and reuse. The main advantage of the Tesa adhesive nail is the ability to attach objects without damaging the surface. This avoids unnecessary drilling, which significantly reduces noise and mess, saving you time. The product is not suitable for wallpaper, plaster, copper, brass, coated paper, non-stick and porous surfaces.
Clean the surface, apply the adhesive strip and activate the Powerstrips technology
Clean the surface before application. Use a silicone-free cleaning agent (silicone reduces adhesion). Let the clean surface dry. Unpack the adhesive strip and apply it vertically to the clean, dry surface. Press the strip down firmly for 5 seconds to increase its grip and effectiveness.
Attach the nail and ensure a perfect hold
Remove the protective film from the strip and stick the nail on so that the top corners of the nail and the strip are aligned (above the red line). Now press the TESA nail onto the surface for 5 seconds at the top. Do the same for the bottom part.
Height adjustment
Slide the red toggle to select the desired nail position. Sliding the toggle down secures the nail again, achieving perfect alignment for your hanging items. Attach your object. It holds items weighing up to 4kg. Using 2 nails increases the load capacity to 8kg. The TESA adhesive nail is therefore ideal for hanging various pictures, shelves or clocks.
Removing the nail
Grasp the head of the nail and slowly pull the adhesive strip down along the wall. This releases the adhesive and removes the nail.
Surfaces where Tesa adhesive nails can be used:
Tiles
Material:
Polystyrene
Load capacity:
4kg
Heat resistance (max):
35°C
Heat resistance (min):
5°C
Application temperature:
15°C
| Code: | TESAP037 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
tesa tape s.r.o., Walterovo náměstí 329/3, Jinonice, 158 00 Praha 5, www.tesa.com 
|