POWERPLUS Impact Driver / Drill AKU 20V LI-ION 2BAT POWX00445 (2x2 Ah)

Show alternatives
Product accessories

Don't like the alternatives?

Choose from the full offer

POWERPLUS Impact Driver / Drill AKU 20V LI-ION 2BAT POWX00445 (2x2 Ah)

The POWERPLUS POWX00445 is a 20 V cordless screwdriver and impact drill combination for use in and around the home. The drill is powered by a two-speed carbon motor with a maximum speed of 1,400 rpm. There are 16 different torque positions with a maximum of 50 Nm. Thanks to the impact mechanism with a frequency of up to 28,800 blows per minute, it can also handle harder materials such as concrete. Work tools up to a diameter of 13 mm can be mounted in the quick-release chuck. The handy side switch is used to tighten or loosen screws. The package contains two 20V batteries with a capacity of 2 Ah and a handy charger, so you can work without interruption - one charge takes approximately 60 minutes. A practical light ensures suitable lighting conditions. In the event of a problem, the chuck will automatically lock. The maximum noise level is 90 dB. The whole set is stored in a practical storage case.

POWX00445

Key features of the POWERPLUS POWX00445 cordless screwdriver/drill, 20 V, 2×2 Ah

  • Practical combination of screwdriver and impact drill
  • Two 2 Ah Li-ion batteries for flexible use anywhere
  • Cordless screwdriver with adjustable speed up to 1,400 rpm
  • Impact mechanism with up to 28,800 strokes per minute
  • Screwdriver for tools up to 13 mm diameter
  • Torque control up to 50 Nm
  • Side switches for tightening/loosening
  • The work light ensures suitable lighting conditions
  • Charging the battery takes about 60 minutes
  • Cordless drill quickly locks the chuck in case of a problem
  • Maximum noise level of the cordless drill 90 dB
  • Practical storage case for work tools POWERPLUS POWX00445
POWX00445

Using the POWERPLUS POWX00445 cordless drill by material

Use the POWERPLUS POWX00445 Cordless Drill to work with a variety of materials:

  • Wood - maximum drilling diameter: 32mm
  • Steel - maximum drilling diameter: 13 mm
  • Concrete - maximum drilling diameter: 13 mm

Package contents:
screwdriver/drill, 2× batteries, belt buckle, power adapter, screw, storage case, manual

Specifications

Battery

Capacity 2 Ah
Voltage 20 V
Number of accumulators for operation 1

Battery

Number of batteries 2
Battery voltage 20 V
Battery capacity 2 Ah (2,000 mAh)

Usage

Product type device
Battery type Li-Ion
Category Workshop tools

Type

Type Hand drill (classic)
Hammering Impact
Power Supply AKU

Performance

Max. speed 1,400 rev/min
Max. torque 50 Nm
Motor Type Carbon

Features

Features Torque regulation, Battery status indicator, LED light
Max. chuck size 13 mm
Number of speeds 2
Chuck Quick release

Weight

Weight 1.9 kg

Included

Included Transport packaging, Hanging loop, Charger
Code:  PWP154c9
Manufacturer information

VARO - Vic. Van Rompuy nv, Joseph Van Instraat 9, 2500 Lier Belgie, [email protected]

Show more