DJI Lito X1 Fly More Combo Plus (DJI RC 2)

* All videos and images on this site were taken by professionals using the DJI Lito X1 drone in strict compliance with local laws and regulations and have been edited in various ways in post-production. All videos and images are for illustrative purposes only. Actual results may vary. Always comply with local laws and regulations before flying and make sure the drone has received the appropriate certifications and permission to fly.
** All data was verified on a production DJI Lito X1 model in a controlled environment. Actual results may vary depending on environment, usage and firmware version.
*** All images, videos and on-screen content relating to the product itself on this page are for illustrative purposes only. The actual appearance of the product (including, but not only, appearance, colours and sizes) and the content displayed on the screen (including, Background, user interface and illustrations) may vary.
¹ The omnidirectional vision system contributes to flight safety only under certain conditions and does not replace your own judgement or control. During flight, always pay attention to your surroundings and the warnings in the DJI Fly app. At all times the user is responsible for the drone and must be in control of it. If GNSS signals are not available, the optimum height range for using a visual positioning system is 0.5 to 30 m. When flying outside this range, the performance of the visual positioning system may be reduced. Fly carefully. The visual system may not work properly when the drone is flying over water, which may prevent it from actively avoiding the water surface when landing. Users should be in control of the drone at all times, making operational decisions based on an assessment of the surrounding environment and not relying solely on the visual system. The visual system cannot detect certain objects or surfaces, including large structures with frames and cables (e.g. tower cranes, high-voltage transmission masts, high-voltage transmission lines, suspension bridges); surfaces without texture or with a fine texture; surfaces with repeating identical patterns or textures (e.g. small tiles of the same colour); monochrome surfaces (e.g. pure black, pure white, pure red, pure green); highly reflective or mirrored surfaces (e.g. ice, road signs); water or transparent surfaces; surfaces of moving objects (e.g. over a moving crowd, over waving bushes or grass); moving obstacles (e.g. walking people, moving vehicles); scenes with drastic lighting changes; surfaces that are extremely dark (e.g. less than 1 lux) or extremely bright (e.g. more than 100 000 lux); materials with strong infrared absorption or reflection properties (e.g. mirrors, glass, road signs, asphalt); small obstacles (e.g. fences, branches, power lines); and thin columns or small vertical objects (e.g. power line poles, street lamps). Under no circumstances shall the sensing system be covered or disturbed. Make sure all lenses are clean, free of dirt, smudges or other contaminants and are not scratched. The cameras of the vision system may need to be calibrated after prolonged storage. The DJI Fly app will prompt you and calibrate automatically. Do not fly in rain, smog or visibility below 100 m. Check the glass surfaces of the sensing system before take-off. Remove any protective films, stickers or other obstructions. If there are water droplets, fingerprints or smudges on the glass, clean the glass with a lint-free cloth. Do not use alcohol or other organic solvents. If the glass surface is loose, broken, scratched or worn, send the drone to an authorized service center for repair. Please refer to the product user manual for further details.
² ActiveTrack only works properly under certain flight conditions. See footnote no. 1 to ensure that the omnidirectional vision system is operating normally, and avoid flying in the following environments or conditions: DO NOT fly in inclement weather, such as strong winds (wind speeds greater than 10.7 m/s), snow, rain, storm or fog. DO NOT fly the drone at an altitude of 4,500 m or more above sea level. DO NOT fly the drone in an environment where the temperature is below 0 °C (32 °F) or above 40 °C (104 °F). DO NOT fly from moving objects such as cars or boats. DO NOT fly near reflective surfaces such as water or snow. Otherwise, the visual system may not work properly. The visual system may not work properly in low-light environments. Always fly carefully and prevent the drone from going into Attitude mode. DO NOT fly near areas of magnetic or radio interference. Common sources of magnetic or radio interference include Wi-Fi hotspots, routers, Bluetooth devices, high-voltage lines, large electricity substations, radar stations, mobile base stations and transmission towers. When taking off from a desert or beach, prevent sand from entering the drone. Fly your drone in open areas away from groups of people. Buildings, mountains and trees can block the GNSS signal and affect the functionality of the internal compass.
³ Actual product weights may vary depending on differences in materials from batch to batch and external factors. In most countries and regions, no training or test is required to fly this product. With the Intelligent Flight Battery Plus, the weight of the drone will exceed 249 g. Regulatory requirements vary by country or region. In the EU and UK, this Plus battery is only approved for use with the DJI Lito X1 Fly More Combo Plus (DJI RC 2). Always check local laws and regulations before use.
⁴ When using the Intelligent Flight Battery, the maximum flight time is 36 minutes. This value was measured in a controlled wind tunnel environment under conditions consistent with use without wind and at sea level, with the drone flying forward at a constant speed of 21.6 km/h, with Obstacle Avoidance Action set to Brake and in photography mode, until a forced landing due to battery depletion. In the EU or the UK, the extended flight time of 52 minutes is only available in accordance with the regulations for the DJI Lito X1 Fly More Combo Plus (DJI RC 2) when flying forward at a constant speed of 21.6 km/h. Always check local laws and regulations before use.
⁵ Measured in an open outdoor environment without interference and in accordance with IC standards. The figures represent the maximum communication range for one-way non-return flights. During flight, always pay attention to the Return to Home (RTH) alerts in the DJI Fly app.
⁶ Photo resolution can reach up to 8K (48 MP). At 8K (48 MP) resolution, SmartPhoto is not available. At 4K (12 MP) resolution, SmartPhoto can be automatically enabled to apply algorithm enhancements.
⁷ In Auto mode, a dynamic range of 14 EV can be achieved for video, but not for slow-motion videos or 2.7K vertical videos at 48/50/60 fps.
⁸ This value indicates the flight speed of the drone when flying in tracking mode. The maximum tracking speed in other directions is 8 m/s. The value was measured in a controlled wind tunnel environment under conditions corresponding to flight without wind and at sea level, with the drone rising vertically to a height of 1.5 metres above the ground. Actual results may vary depending on environment, usage and firmware version.
⁹ Conditions for memorizing flight paths: The front, back, left, right and top sides of the drone are near textured surfaces with illumination exceeding 10 lux. Similarly, the surface under the drone must be textured and diffusely reflective with a reflectivity of more than 20% (e.g. walls, trees or people), also under lighting conditions of more than 10 lux. For take-off from a balcony, provide at least 2 × 2 metres of space and a height below 30 metres above the ground for a safe return home. If the drone reaches its altitude limit when climbing around obstacles, it will hover at that altitude.
¹⁰ Measured under laboratory conditions with minimal interference in countries/regions that support both 2.4 GHz and 5.8 GHz frequencies. Download speeds may vary depending on specific conditions. The estimated time of 11 minutes is based on a maximum download speed of 50 MB/s for a data volume of approximately 32 GB. Actual time may vary depending on ambient conditions and equipment performance.
¹¹ Parallel charging requires batteries of the same model and a PD-compatible charger with an output power of 45 W or higher. During parallel charging, the two batteries with the lower state of charge are first charged sequentially to a level similar to the battery with the highest state of charge, then all three batteries are charged simultaneously to full capacity.