KochChemie Micro Cut M3.02 250ml

Car & Moto Car Cosmetics Exterior Paint Polishing & Correction Polishing & Grinding Pastes

5 3 rating

7,490 Ft

KochChemie Micro Cut M3.02 abrasives belong to the range of quality car care products from the German manufacturer Koch-Chemie. It is the state- of -the-art, final polishing paste with microparticles , intended for machine polishing, up to the grit size 3000. The abrasive paste does not contain silicone oil and has an extremely homogeneous abrasive grain. This gives you a very durable, brilliant high gloss, even in dark shades and in extreme light conditions. It is suitable for all types of paints, including those resistant to scratches. Ideal for permanent, mechanical removal of holograms, fine scratches, polishing and grinding marks and sharp parts.

Key features of KochChemie Micro Cut M3.02

Quality representative of German car cosmetics brand KochChemie
Micro Cut M3.02 abrasive paste for machine polishing containing microparticles
Allows machine polishing up to 3000 grain sandpaper
Micro-abrasive antihologram polish with extremely homogeneous abrasive grain
Silicone oil-free abrasive composition
KochChemie Micro Cut M3.02 for high gloss even in dark and sensitive shades
Car cosmetics for removing holograms, fine scratches, polishing and grinding marks and sharp parts
KochChemie polish suitable for all types of paints, including durable

Field of application:
Varnishes for cars, commercial vehicles, motorcycles ...

Degree of grinding:
3.2

Gloss level:
9

Method of use:
Shake well before use and test its suitability and tolerability. Wash the surface to be treated and allow to dry completely. Apply the polish evenly on the dried or new polishing wheels, evenly over the entire surface of the wheel. Leave the polisher still switched off and spread the polish over the paint in a thin layer. Then use a rotary polisher to polish crosswise and at medium pressure until a transparent film is formed (until the alumina contained in the polish is completely broken). Do not use the polishing discs used on this product for other products. Use a professional microfibre cloth to remove polish residue without scratches or scratches. Protect from frost and excessive heat. Do not use on hot surfaces.

Tip:
For optimum results, the manufacturer recommends the use of a KochChemie Micro Cut Pad (violet) and an eccentric sander with forced rotation (eg. Makita PO5000C, highest speed). Alternatively, a rotary polisher can be used to polish surfaces in combination with the KochChemie Micro Cut Pad.

Choose the optimum grinding paste packaging:
KochChemie Micro Cut M3.02 - 250 ml
KochChemie Micro Cut M3.02 micro-abrasive paste - 1000 ml