The SYNCO WAir-G1 (A1) is a compact 2.4GHz microphone set that is ideal for reporting, vlogging, lectures, interviews and much more. It uses the advanced Syncoder Encrypted Transmission Alogorithm, which enables accurate audio signal capture. The powerful transmitter allows a range of 50-200 metres and the integrated Li-Ion battery promises up to 8 hours of battery life and fast charging support.
This unique FHSS (Frequency Hopping Spread Spectrum) based algorithm enables 128-bit encrypted signal transmission and automatic channel change. Only a secure audio system guarantees stable and trouble-free accurate audio signal capture.
The powerful transmitter and low response ensure reliable sound transmission and a longer working distance. The G1 (A1) digital wireless microphone transmits a distortion-free signal up to 200 metres without obstruction and up to 50 metres in challenging environments.
The G1 (A1) processes audio in real time with a DSP (Digital Signal Processor). The analogue signal received by the transmitter is converted to a digital track that is immediately sent to the receiver. Thanks to the processing speed, there is no signal delay during transmission.
The SYNCO G1 (A1) offers a low-pass filter to remove noise below 180 Hz caused by e.g. wind or air conditioning. A button on the receiver allows easy control of the gain level from 0-4 (8 dB total). Use the 3.5mm jack to connect headphones and monitor the sound in real time, then make adjustments accordingly. All this ensures a clear and crisp sound output.
The integrated 400 mAh Li-Ion battery allows up to 8 hours of recording in ideal conditions. A great advantage is the fast charging option, where you can charge it to 50% in just 40 minutes (80% in an hour). Of course, there is a power indicator that flashes to indicate low battery, glows green when charging and goes out when fully charged.
The pocket-sized wireless microphone system can be used seamlessly with almost any camcorder or camera. Included in the package are the necessary 3.5mm TRRS/TRS cables, which also allow connection to Android and iOS mobile devices.
Wireless transmission: digital 2.4 GHz
Frequency band: 2 400 - 2483.5 MHz
Range: 50-200 metres
Latency: 12.5 ms
Installation: pocket clip
Input: microphone 3.5mm TRS
Audio input level: 1 v (0f dBV)
Output power: < 10 mW
Power supply: 3,3-4,7 V
Batteries: Integrated Li-Ion 400 mAh
Charging time: 2 hours
Battery life 8 hours
Dimensions: 52 × 42 × 16mm
Material: plastic
Weight: 35g
Wireless transmission: digital 2.4 GHz
Frequency band: 2 400 - 2483.5 MHz
Sensitivity: -81 dBm
Range: 50-200 metres
Latency: 12.5 ms
Installation: pocket clip
Output: microphone 3.5mm TRS + headphone output
Gain: 0-4 (0-8 dB)
Audio input level: line output 1 v; Monitoring 25-30 mW
Power supply: 3,3-4,7 V
Batteries: Integrated Li-Ion 400 mAh
Charging time: 2 hours
Battery life: 8 hours
Dimensions: 52 × 42 × 16mm
Material: plastic
Weight: 35g
Design: Integrated
Type: mono
Characteristics: Omnidirectional
Frequency: 50- 20 000 Hz
Sensitivity: -40 dB
Max. SPL input: 120 dB SPL (at 1 kHz)
| Code: | SYNCb40 |
| Links: | Producer's Website: |
