Tempish Viber L.E. 110, EU 37 / 236 mm

Roller skates TEMPISH VIBER L. E. The 110 combines a freestyle hard shoe with the speed potential of large 110 mm wheels. It is a versatile model designed for shorter trips around the city, as well as for cycling on cycle paths thanks to the large wheels. Skates are suitable for advanced and experienced riders. Thanks to its construction and equipment, the skates with a hard skeleton are designed for universal use. The short chassis ensures excellent manoeuvrability. The three 110 mm wheels enable high speeds. The chassis also allows the fitting of smaller wheels - the minimum recommended size is 90 mm. The skeleton is very well ventilated - air flows all the way to the foot thanks to a vented liner with perforations all around, including the tongue. A screw with a special nut and washer is used in the area of the joint, which makes the cuff replaceable and can be tightened if necessary.

Fastening system for maximum comfort and security

The upper metal self-locking buckle is curved at the end for a better grip, the belt slides into the skeleton so that it does not interfere with the other skate during the slalom. The buckle is protected against damage by a plastic sprue. The ankle strap is equipped with a one-stage micro-cut with a ratchet system for comfortable and precise tightening and loosening. Waxed laces 10 mm wide hold better, they are less slippery and allow even gradual tightening.

Liner, comfort and design details

The plastic protectors on the outside of the skates and the ankle strap are replaceable. Lace holes are reinforced with metal eyelets to protect against damage and ensure better tightening. Thanks to the material used at the bottom, the liner sticks better in the skeleton and does not slip. The liner is completely perforated for better ventilation, the upper part is reinforced with PVC material. There is elastic neoprene in the toe area for greater comfort, and a tongue loop for easier putting on. The outer part of the skate is complemented by reflective elements. The Achilles tendon area is lowered and shaped into a "V", which improves maneuverability and makes it easier to perform freestyle tricks. In the ankle flexion area, the cutouts are covered with elastic neoprene to maintain the anatomical shape without restricting movement. Under the cuff are added additional eyelets for laces for better fixation of the leg. The insole in the skate is anatomically shaped with a thickness of 3 mm, comfortable enough, but not too soft.

Shock absorption, tongue and chassis

Under the liner in the heel area there is a shock-absorbing silent block made of TPR material, which perfectly absorbs shocks and vibrations. It is quite strong, soft and very comfortable. The tongue of the liner is sufficiently stiff and strong, made of two parts, thanks to which it precisely follows the instep. Thanks to the tightening elastic it stays in the right position. The chassis made by CNC technology has spatial reinforcement structure, it is very strong, stable and precise. It is attached to the shoe with two central screws and two threaded aluminium blocks to ensure more efficient energy transfer. The chassis can be adjusted laterally and longitudinally. Hollow 8 mm diameter lugs reduce weight, mounted on the inside of the left skate and on the right skate on the outside to prevent loosening during riding.