Tempish S.R. PRO size 44 EU / 273 mm

Roller skates Tempish S. R. PRO are suitable for both beginners and experienced skaters with medium to wide feet. The skeleton of the skate is well ventilated - ventilation extends to the foot thanks to a perforated liner with holes all around, including the tongue. The joint uses a screw with a special nut and washer, which makes the cuff replaceable and can be tightened if necessary. The system ensures a longer service life than a conventional joint rivet. The top metal self-locking buckle has a curve at the end for a better grip. The belt is inserted into the skeleton to prevent it from catching on the other skate during slalom or freestyle, and the buckle is also protected by a lower plastic molding against damage. The ankle strap is fitted with a one-stage micro-ratchet system that allows comfortable and precise tightening and loosening. The plastic protectors on the outside of the skates and the ankle strap are replaceable. Lace holes are fitted with strength metal rings for protection and better fixation. Waxed laces with a width of 10 mm allow gradual tightening and a more effective adhesion of the skeleton to the foot.

Liner and comfort

The liner is well ventilated, reinforced in the upper part with PVC material, with elastic neoprene in the finger area for greater comfort. The back strap with reflective strip makes it easy to handle. Additional reflective elements are also on the outside of the skate. The space in the Achilles tendon area is reduced and shaped in a V, which increases maneuverability and makes it easier to perform freestyle elements.The cutouts in the ankle area are covered with elastic neoprene, allowing natural movement while maintaining rigidity. The lower part of the liner is made of material with a non-slip surface. Inside, there is a 3 mm thick anatomical insole that provides comfort without losing support.

Damping and language

In the heel section under the liner there is a TPR block that effectively absorbs vibrations and shocks. It is soft, comfortable and thick enough for protection. The tongue of the liner is made up of two parts, it is stiff and well shaped at the same time for a precise fit to the instep. Thanks to the tightening elastic, the tongue stays in place during movement.

Chassis and settings

The CNC milled space frame chassis is heavily reinforced, extremely strong and stable. It is attached to the shoe by two central screws and a pair of threaded aluminium blocks, that ensure efficient power transmission. The chassis can be adjusted laterally and longitudinally. The 8 mm diameter hollow lugs reduce the overall weight of the skate and are mounted from the right side to prevent the screws from loosening when riding.