OUTEQ 780lm IP44 FlashLight FL6
OUTEQ 780lm IP44 FlashLight FL6
OUTEQ FL6 is a compact rechargeable LED torch with a luminous flux of 780 lumens and a beam range of up to 160 metres. Control it using a single side button with five modes and charge it via USB-C directly in the body. The magnetic base holds it securely on metal surfaces, leaving both hands free for repair or maintenance work.
Key features of the OUTEQ 780 lm IP44 FlashLight FL6 torch
- 780-lumen luminous flux and beam range of up to 160 metres: light reaches the end of the yard or a row of trees instead of stopping a few steps in front of you
- Five light modes (low, medium, high, strobe, SOS): double-click activates the high mode without cycling through the other settings
- Magnetic base: torch attaches to a car bonnet, distribution board or metal shelving to keep both hands free
- In-body USB-C charging: no need to remove the battery when recharging, just plug in the included cable
- Replaceable 18650 cell: after years of charging cycles, replace the battery, not the entire torch
780-lumen output and a beam range of up to 160 metres
A single powerful 12W LED generates the light. The 780-lumen luminous flux illuminates the entire surrounding area rather than just a narrow cone at your feet, and the beam range of up to 160 metres corresponds to the distance at which you can distinguish the edge of a property, a row of trees or the end of a warehouse in high mode. Battery life lasts approximately 3 hours on a single charge and varies depending on the selected mode: high mode drains the cell fastest, while dimmed modes shine significantly longer. The low or medium mode is ideal for night dog walks, checking the cellar or walking on unpaved paths, while full power comes in handy when you need to see far into the distance.
Five modes and single-button control
The torch offers five modes: low, medium, high, strobe and SOS. Cycle through them using a single button on the side of the head, which you press with the thumb of the hand holding the torch, meaning you only need one hand even when wearing gloves. A double-click bypasses the cycle and goes straight to high mode. Dimmed modes are perfect for reading maps or moving around camp where full power would dazzle others and unnecessarily drain the battery. Strobe and SOS modes are not intended for everyday use, but they belong in your car or hiking backpack to attract attention and signal for help.
Magnetic base for hands-free working
The base of the torch features a magnet that secures the FL6 to a car bonnet, metal distribution board, steel shelving or a vehicle lift. The light then points exactly at the repair area, leaving both hands free for your tools. This transforms work under the bonnet, in the garage or inside a fuse box where there is nowhere to place a torch. The magnet holds on ferromagnetic metals like steel and cast iron.
Aluminium body and IP44 protection
The body is made of aluminium alloy with an anodised finish. The metal dissipates heat generated in the head of the torch during high-power operation, which is why the head features a HOT warning: the surface around the reflector warms up after prolonged use in high mode, so hold the torch by its body. Knurling on the middle section improves grip even with gloves or wet hands. IP44 protection shields the electronics from dust and splashing water, meaning rain or snow will not damage the torch during outdoor work. However, this does not protect against submersion – do not submerge the torch or place it under running water. This protection rating is fully sufficient for standard outdoor, garage and workshop use.
USB-C charging and a replaceable 18650 cell
The USB-C charging port sits under a cover directly in the body of the torch, so the battery remains inside during recharging. Charge it using the same adapter as your phone or from a computer USB port. It features a 5V⎓1A input and includes a USB-C to USB-C cable. The cover also protects the connector from dust and moisture when carrying the torch in your pocket or backpack. Inside, it runs on a single replaceable 18650 Li-ion cell with a capacity of 2200mAh (3.7V, 8.14Wh). It is not sealed inside the body, so when the cell capacity gradually decreases after years of charging cycles, simply insert a new one and keep using the torch.
Dimensions and everyday carry
The body measures 128×28×26mm and weighs 138g. The torch easily fits into a jacket pocket, a side backpack pocket or a car glove compartment, where it takes up no space and stays ready whenever needed. The body diameter is designed for single-handed grip, leaving your other hand free for tools, keys or a dog lead. The package includes a clip to attach the torch to a backpack strap, trouser pocket or belt. This keeps the light within reach, saving you from searching the bottom of your bag every time you set it down.
Technical information
- Type: compact rechargeable LED torch
- Luminous flux: 780 lumens
- Beam range: up to 160 metres
- Light modes: low, medium, high, strobe, SOS
- Battery life: approximately 3 hours depending on selected mode
- Rated power consumption: 12W
- Voltage: 3.7V
- Battery: 1× 18650 Li-ion, 2200mAh (3.7V, 8.14Wh), replaceable
- Charging: USB-C, input 5V⎓1A
- Magnetic base: yes
- Body material: aluminium alloy, anodised finish
- Protection rating: IP44
- Dimensions: 128×28×26mm
- Weight: 138g
- Colour: black
Package contents:
1× OUTEQ FL6 torch, 1× 18650 Li-ion battery, 2200mAh, 1× USB-C to USB-C cable, 1× belt clip, user manual
Specifications
Features
Power Supply
Construction
Features
Dimensions and weight
Colour
Packaging
| Code: | SPToute008 |
| Warranty: | 24 months |
| Manufacturer information |
S-Cube s.r.o.;Krajankova 3176/2, Prague, 141 00, Czechia, +420 608663085 |