Fenix PD35 V3.0
Fenix PD35 V3.0
The high-performance Fenix PD35 V3.0 pocket flashlight delivers up to 1700 lumens (ANSI) and a range of up to 357 meters. The flashlight is powered by a Li-ion 18650 2600 mAh battery (included), with its own micro-USB charging connector. The Fenix PD35 V3.0 has six different light modes that allow you to choose between high power and long lasting. One of the light modes is strobe, which is suitable for crisis situations. The flashlight is powered by a digitally regulated constant current to guarantee constant light output even when the battery voltage is reduced, and it is also equipped with a battery charge indication. The Fenix PD35 V3.0 flashlight also impresses with a tactical switch and the possibility of attaching the Fenix AER-02 cable switch.
1 700 lm
Light flux
357 m
Maximum range
Accumulator
Power source
Metal
Material
Key features of the Fenix PD35 V3.0 flashlight
- Intelligent overheating protection
- Smooth parabolic reflector for light cone with a range of 357 metres
- Output up to 1700 lm
- Removable steel buckle
- Made of aerospace hardened aluminium
- Tempered ultra clear glass lens with anti-reflective surface
- Shockproof against falls from a height of 1 metre
- 6 lighting modes
- The battery has a capacity of 2600 mAh
- Maximum battery life 230 h
- IP68 rating
- Flat-running threads with increased wear resistance
- Removable steel buckle
- The dimensions of the flashlight are 25.4 × 22.8 × 134 mm
Intelligent overheating protection
The Fenix PD35 V3.0 flashlight has an intelligent overheat protection function. If the temperature of the lamp rises above 60 °C, it will automatically reduce power in gradual steps until its temperature stabilizes. As soon as the temperature of the lamp drops below 60 °C, the power is automatically increased to the original level again.
Using the Fenix PD35 V3.0 flashlight
There may be a black insulating cap on the battery inside the flashlight from the factory. Remove it from the battery before first use. To switch on, press the switch located at the end of the flashlight, to activate immediately press the button. By pressing the side button on the head of the flashlight, you can switch between the five permanent light modes at any time during operation. To switch to strobe mode, hold down the side button for about 0.5 seconds.
Charging
Plug the USB cable into the side micro-USB connector on the battery. During charging, the light on the top of the battery glows red. It glows green or blue when fully charged. Charging time for a fully discharged battery is 3-3.5 hours.
Additional information
- Max endurance 230 hours
- Light colour Daylight white (5500-6500 K)
- Waterproof IP68 (2 m immersion)
- Light source Luminus SFT-40
- Weight 133 g
Accessories
- Wrist lanyard
- Belt holster
- Spare o-rings
- Battery Fenix 18650 2600 mAh
- USB and micro USB charging cable
Light flux
It is specified in Lumens (lm) and the higher the value, the more intensely the headlamp shines. Some LED headlamps offer multiple levels of light intensity, adjustable either in steps or continuously. However, the higher luminous flux shortens the endurance.Up to 100 lm - headlamp for home use (lighting in the basement, in the attic, when repairing the car).
100 - 400 lm - outdoor use (night running, cycling, camping).
Above 400 lm - extreme occupations and sports (rescue workers, climbers).
Specifications
Type
Features
Power supply
Waterproof
Special features
Dimensions
Colour
Packaging
Features
Power Supply
Construction
Features
Dimensions and weight
Colour
Packaging
| Code: | SPTfen40 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
ARIGA s.r.o., Holečkova 2282/76, 150 00 Praha 5, Česká republika, +420 734 793 444, [email protected] 
|