PremiumCord HDMI FULL HD 50m Extender Over Single CAT6 Cable

Key features of the PremiumCord HDMI FULL HD extender

• The PremiumCord HDMI FULL HD extender can transmit a FULL HD 1080p signal up to 50 metres
• Includes transmitter and receiver units
• Can transmit resolutions from 480i to 1080p
• Maximum data transfer rate of the PremiumCord extender is 10.2Gbps

Instructions for use:
Take the transmitter and receiver units out of the box and connect them with a Cat6/Cat6A/Cat7 cable. Both have a micro USB connector. Plug the short micro USB male to USB A male cable into it. Plug the other end of the USB connector into a PC or monitor to power the extender. To transmit data over a distance of 50 metres, use a copper cable with AWG23 conductors, such as a UTP Cat6 cable.

Warning:
Do not connect the extender to an active computer LAN, switch, router, or any other active network device. The extender’s transmitter and receiver must be connected directly with a LAN cable, preferably without any interruptions.

Package contents:
1× transmitter unit
1× receiver unit
2× micro USB male to USB A male power cables
1× manual