ONDILO ICO Replacement PH sensor blue + calibration kit
ONDILO ICO Replacement PH sensor blue + calibration kit
The Ondilo ICO replacement pH sensor is used to measure the pH level of water in pools and hot tubs compatible with ICO Pool and ICO Spa systems. The blue-coloured probe contains electrochemical components that are subject to normal wear and tear over time. Regular care of this consumable part helps prevent measurement deviations. Accurate water condition assessment prevents unwanted overdosing or underdosing of pool chemicals. Correct pH values directly affect water quality and overall comfort while bathing.
Key features of the ONDILO ICO Replacement PH Sensor, Blue + Calibration Kit
- The probe uses the Twist&Lock system
- The package includes a complete calibration kit
- The user performs the setup via the mobile app
- The storage solution maintains the internal electrodes
- The kit includes buffers with pH 4 and pH 7 values
- The device requires calibration after a certain period of operation
Compatibility with ICO Systems
This replacement Ondilo ICO pH sensor is fully compatible with ICO Pool and ICO Spa stations. Integration into your existing system is seamless, with no need for complex software adjustments. The probe sends the measured data directly to the mobile app, where the user can see the current water status. A properly functioning sensor contributes to accurate real-time water quality monitoring.
Quick Replacement with the Twist&Lock System
Replacing the worn-out probe does not require professional service or special tools. With the Twist&Lock system, you can easily remove the old part and quickly install the new one. The removal key, supplied in the original ICO station packaging, is used to release it. The entire replacement process takes only a few minutes, and the device is immediately ready for further operation.
Calibration and Maintenance
The sensor does not require immediate calibration right out of the box, as the calibration process serves to correct deviations caused by gradual wear and tear. However, to maintain measurement accuracy, it is necessary to perform calibration repeatedly throughout the season. Regular calibration maintains the high reliability of the measured pH values. The app on your smartphone guides the user through the entire process step-by-step.
Complete Calibration Kit Included
The package includes all the accessories needed for subsequent probe maintenance. In the kit, the user will find a calibration stand, pH 4 and pH 7 buffer solutions, and a KCl regeneration storage solution. These liquids are used for precise setting of the measuring ranges and for safe storage of the sensor during the off-season. Storing the solutions in separate containers allows for repeated use in case a calibration correction is needed.
Correct Calibration Procedure
The calibration process is carried out indoors at room temperature, with a recommended value of 25°C, assisted by the mobile app connected via Bluetooth. The probe is first rinsed with clean tap water and dried with a soft cloth. It is then successively placed in the pH 4 and pH 7 buffer solutions. Between each step, it is necessary to thoroughly rinse and dry the probe and the stand to avoid contaminating the calibration liquids.
Off-Season Storage
If the measuring station is not used for an extended period, the sensor requires specific storage conditions. The user protects the probe with the black caps, which contain small sponges soaked in KCl storage solution. The device must be stored indoors at a room temperature ranging from 15 to 25°C. Proper storage prevents the electrochemical parts from drying out and extends the overall lifespan of the sensor.
Package contents:
pH sensor, pH 4 buffer solution, pH 7 buffer solution, regeneration solution, ICO calibration stand and manual
Purpose:
Water pH measurement
Compatibility:
ONDILO ICO Pool, ICO Spa
Mounting system:
Twist&Lock
Calibration:
pH 4 and pH 7
| Code: | ONDa26005 |
| Warranty: | 24 months |
| Links: | Producer's Website: |