Montech TEN White
Montech TEN White
The Montech TEN computer case is a compact and exceptionally flexible case created to celebrate Montech's 10th anniversary, and it's a winner of the Red Dot Award 2026: Product Design. Its modular Adaptive Architecture lets you customise the internal layout according to your build type – from the M1 air-cooled configuration and the M2 water-cooled setup, to the compact I3 Mini-ITX mode. With its mesh panels, the case offers both excellent component visibility and efficient airflow. The interior supports graphics cards up to 425mm long, CPU coolers up to 155mm high, radiators up to 360mm, and up to 10 fan positions. It also includes a pre-installed 92mm rear fan, a modern I/O panel with a 20Gb/s USB-C, two USB 3.0 ports and a combination audio jack, as well as well-thought-out options for installing the power supply, drives, and cables.
Mini Tower
Size
155mm
Maximum CPU cooler height
425mm
Maximum graphics card length
1× 92mm
Number of installed fans
10×
Number of fan positions
Key features of the Montech TEN computer case
- Compact computer case with modular Adaptive Architecture
- Three internal layout modes – M1, M2 and I3
- Micro-ATX and Mini-ITX motherboard support
- M1 mode is designed for high-performance air cooling with a CPU cooler up to 155mm high
- M2 mode supports water cooling with radiators up to 360mm
- I3 mode offers a compact Mini-ITX configuration
- Horizontal graphics card installation up to 425mm or vertical up to 410mm
- Mesh panels combine internal build visibility with efficient airflow
- Stack effect supports natural airflow from the bottom upwards
- Up to 10 fan positions depending on the selected mode and build configuration
- Pre-installed 92mm rear fan
- Support for up to 360mm radiators at the top, side or bottom, depending on the mode and graphics card orientation
- 7 PCIe expansion slots
- Up to 9 configurable power supply positions
- Support for ATX, SFX-L and SFX power supplies depending on the selected mode
- Positions for up to 2× 3.5" HDDs and 4× 2.5" SSDs in M1 and M2 modes
- I/O panel with 2× USB 3.0, 20Gb/s USB-C, power button and combination audio jack
- Bottom dust filter for easier maintenance
- Includes a Montech 10th anniversary kit
Adaptive design for different build types
The Montech TEN is built on a modular architecture that adapts to your PC building style. The internal layout can be set to three modes – M1, M2 and I3 – so you can easily choose the configuration based on whether you prefer air cooling, water cooling or an ultra-compact Mini-ITX build. This gives the case a high degree of flexibility, even in a small volume.
M1 for high-performance air cooling
The M1 mode is ideal for air-cooled builds. It offers space for a CPU cooler up to 155mm high and utilises the stack effect, which encourages airflow from the bottom of the case upwards. The mesh panels allow fresh air to easily reach the components and heat to be efficiently exhausted.
M2 for water-cooled builds
The M2 mode is designed for users who want to use water cooling. The case supports radiators up to 360mm at the top or side position, depending on the specific configuration. The internal space is designed to provide plenty of flexibility for high-performance components, tubing, fans and radiators without unnecessary compromises.
I3 for a compact Mini-ITX configuration
I3 mode transforms the Montech TEN into a compact Mini-ITX case for space-saving builds. It's ideal for users who want a small, clean, and efficient PC but still require support for a powerful graphics card, good airflow, and modern connectivity. In this configuration, you can use a low-profile CPU cooler up to 52mm in height.
Mesh panels for visibility and airflow
The Montech TEN features a mesh design that combines subtle transparency with high functionality. The perforated panels showcase the internal build while promoting continuous airflow. This gives the case an elegant and airy look, while the components have plenty of space for effective cooling.
Wide compatibility for powerful components
Despite its compact dimensions, the Montech TEN offers plenty of space for high-performance hardware. The case supports graphics cards up to 425mm long with horizontal installation and up to 410mm with vertical mounting. There are also 7 PCIe expansion slots, support for multiple SSD and HDD drive bays, and flexible installation options for ATX, SFX-L, or SFX power supplies.
Smart cooling options
The case offers up to 10 fan positions – three at the top, three on the side, three at the bottom, and one at the rear. A 92mm rear fan is already pre-installed. Depending on the chosen mode and graphics card orientation, you can also use liquid cooling radiators up to 360mm in size. The result is a versatile cooling system that you can easily adapt to your specific build.
Flexible placement for PSU and components
The Montech TEN offers up to 9 configurable positions for the power supply, so you can customise the internal space according to your motherboard, graphics card, cooling, and storage. Offset brackets provide 10mm of adjustable clearance, making it easier to align individual components. This gives you greater freedom when planning your build and cable management.
Modern I/O panel
The front I/O panel offers everything you need for daily use. You have a power button, two USB 3.0 ports, a high-speed USB-C port with transfer speeds of up to 20Gb/s, and a combo audio jack for headphones or a headset. Everything is easily accessible and ready for modern peripherals.
Precision craftsmanship and anniversary edition extras
The Montech TEN impresses not only with its thoughtful internal layout but also with its detail-oriented design. The case was created as an anniversary model to celebrate 10 years of the Montech brand, and the package includes an exclusive commemorative set. This includes a protective dust bag with the 10-year logo, a thank you card, an anniversary sticker, and 8 Velcro cable ties.
Motherboard formats
- Micro-ATX
- Mini-ITX
Fans
- Top position: up to 3×120mm or 2×140mm
- Side position: up to 3×120mm or 2×140mm
- Bottom position: up to 3×120mm or 2×140mm depending on graphics card size
- Rear position: 1×92mm
- Pre-installed fan: 1×92mm at the rear
Ports
- 2× USB 3.0
- 1× USB-C 20Gb/s
- 1× combo audio jack
Specifications
Usage and size
Colour
Internal structure
External structure
PSU
Cooling system
Backlight
Material
Dimensions
| Code: | MONten02 |
| Warranty: | 24 months |
| Links: | Producer's Website: |