YATO Impact bits 1/4" × 50 mm T10 2 pcs YT-78051
YATO Impact bits 1/4" × 50 mm T10 2 pcs YT-78051
The YATO 1/4" × 50mm T10 2pcs Impact Bit Set YT-78051 is designed for fastening Torx T10 fasteners using impact wrenches, screwdrivers and drills with a compatible chuck. The bits have a 1/4" (6.3mm) hex shank, are 50mm long and are made of durable S2 steel with a hardness of 58–60 HRC. The phosphated surface contributes to the durability of the YATO 1/4" × 50mm T10 bits, and the set includes 2 pieces for practical work and for the immediate replacement of a worn-out bit.
Key Features of the YATO 1/4" × 50mm T10 2pcs Impact Bit Set YT-78051
- Designed for use with impact wrenches and drills
- Torx T10 profile for driving corresponding screws
- 1/4" (6.3mm) hex shank compatible with standard bit holders
- 50mm length for good reach when driving screws
- S2 steel provides high strength and resistance under stress
- Hardness of 58–60 HRC for long working tip life
- Phosphated surface contributes to protection against wear and corrosion
- A single-type set with two bits of the same design
- Suitable for assembly, workshop and service work
- The YATO 1/4" × 50mm T10 2pcs Impact Bit Set YT-78051 serves primarily as a source of replacement bits for more intensive use
Technical Parameters:
Profile: Torx
Size: T10
Shank Type: Hex
Shank Size: 1/4" (6.3mm)
Length: 50mm
Material: S2 Steel
Hardness: 58–60 HRC
Surface Finish: Phosphated
Pieces per Pack: 2pcs
Weight: 30g
Specifications
Profile
Features
Set
| Code: | YAThob074 |
| Warranty: | 24 months |
| Manufacturer information |
TOYA S.A., 13-15 Sołtysowicka Street, 51-168 Wrocław, Poland, [email protected], +48 71 32 46 330 
|