NAC AKU drill with accessories 126 parts CDB2-40-S-LI-20V (2 × 2 Ah)

Use the NAC CDB2-40-S-LI-20V cordless drill in the garage, workshop and at home. It fits drills and bits with a maximum diameter of 13 mm. Depending on the bit used, it can drill holes in different materials. Thanks to the self-locking system, no wrench or tools are needed to change the drill bit. In addition to the cordless tools, you will also find a handy plastic case, batteries, charger and drill set in the package. The maximum torque of the drill is 40 Nm. The variable speed control can be set from 0 to 1,500 rpm. /min (or from 0 to 400 rpm) /min depending on the selected gear). In addition, you can choose from 25 screwdriving force settings. You can adjust the power according to the material you are working with. If necessary, you can also change the direction of rotation.

Keep control of the drilling

The drill has a smooth start-up after starting. So you get full control over drilling and screwdriving. The ergonomic handle will not slip out of your hand as it is coated with non-slip material. Ensures you have a firm and secure grip on the drill. You can always see your work perfectly. When it gets dark, simply switch on the LED lighting. The drill is powered by a 20V lithium-ion battery. Once it is discharged, you plug it into a power source using a charger and charge it. Plus, you can recharge it at any time. This is because there is no memory effect where the battery loses capacity. Even though it is not fully discharged, you can plug it in without worrying.

Package contents:
1× cordless drill, 2× 2 Ah batteries, 1× charger, 1× drill and bit set, 1× case

Battery capacity:
2 Ah
Torque:
40 Nm
Maximum diameter of drill bits or bits:
13 mm
Speed of rotation:
1. gear: 0 to 400 rpm /min, 2nd gear: 0 to 1 500 rpm /min
Rotation speed control:
Smooth
Rotation:
Dole/right
Weight (without battery):
1.2 kg