MARIMEX Swimming pool with construction Orlando 3,66 × 0,91 m foil, skimmer - RATAN motif
MARIMEX Swimming pool with construction Orlando 3,66 × 0,91 m foil, skimmer - RATAN motif
Thanks to its 366 cm diameter, the MARIMEX Orlando pool allows comfortable refreshment and swimming for several people at the same time. It features a stable and solid construction, galvanized pool wall, wide water level and easy operation. All you have to do is prepare the site, roll out the pool mat, unroll the pool and assemble. 120 minutes after unpacking the pool, you can start filling it with water. After the end of the swimming season, the pool can be winterized directly in the garden. Its walls are made of steel sheet with anticorrosive treatment, the pool foil resists frost. It has an integrated Olympic skimmer that can be connected to the filtration. It is ideal to cover the pool with a cover after swimming.
Above Ground
Type
With steel wall
Version
7700 litres
Volume
Without filtration
Filtration
Key features of the swimming pool with construction MARIMEX Orlando 3,66 × 0,91 m foil, skimmer - RATAN motif
- Swimming pool with a diameter of 366 cm
- It features a stable and solid construction, galvanized pool wall, wide water level and easy operation
- The walls are made of sheet steel with anticorrosive treatment
- The MARIMEX Orlando pool has an integrated Olympic skimmer and a 0.25 mm thick soft PVC pool liner
- It can be connected to the Marimex cartridge and sand filtration
- It can be partially or fully embedded in the ground
- It is suitable for year-round operation, just winterize it
You can also fill the MARIMEX pool with salt water
The MARIMEX Orlando pool has a 0.25 mm thick softened PVC pool liner, which will ensure long-term trouble-free use of the pool. Marimex cartridge and sand filtration can be connected to it. For the connection of the filtration, the wall passages are used, to which the Olympic skimmer and the 32 mm diameter hose are connected. You can also fill the pool with salt water and connect a solinator to it.
The MARIMEX Orlando pool can be partially or completely sunk into the ground
The MARIMEX Orlando pool can be partially or completely recessed into the ground. However, building recommendations and precautions must be followed. The pool should stand on a growing ground. Verify and eliminate the groundwater level at the construction site prior to its embedment. When recessing, it is advisable to think about the location of filtration and other accessories.
The MARIMEX Orlando pool is suitable for year-round operation
The MARIMEX Orlando pool does not need to be dismantled and stored after the end of the season, but is suitable for year-round operation, so you only need to winterize it. When the pool is winterized outdoors, more than 80% of the water will remain in the pool, which you can use the following season and you won't have to refill the whole pool. To winterise, drain the water so that the water level remains approximately 10 cm below the skimmer and close the return nozzle with a plug. Disconnect the filtration and other accessories and apply winterizing chemicals to the pool. If the hoses cannot be disconnected, lower the water level 10 cm below the return nozzle. Then drain the water from the hose.
Orlando pool package components
- Orlando swimming pool
- Instructions
- Minor installation material required to build the pool (rails, connectors, etc. )
- Olympic skimmer
Technical parameters
- Pool diameter 3,66 m
- Pool height 0,91 m
- Water level diameter 366 cm
- One package with dimensions 91 × 38 × 38 cm
Specifications
Type
Features
Dimensions
Equipment
Filtration
Volume
| Code: | MARBA223 |
| Warranty: | 24 months |
| Manufacturer information |
Marimex CZ s.r.o., Libušská 221/264a, Libuš, 142 00 Praha 4, [email protected] 
|