MARIMEX Florida 3.05 x 0.91m RATAN
MARIMEX Florida 3.05 x 0.91m RATAN
Enjoy sunny summer days in the MARIMEX Florida pool in rattan pattern. The Florida pool offers a stable construction with a newly developed unique metal frame and a large swimming area, which you will appreciate especially if you like swimming or have a large family. Everyone will find a place in the pool for fun or relaxation. A great advantage of the MARIMEX pool is its easy commissioning. It is an above-ground pool, so it is not intended to be completely or partially in-ground.
Key features of the MARIMEX Florida 3,05 × 0,91 m, rattan
- The MARIMEX Florida pool offers a stable construction and a large swimming area
- Outer pool wall in rattan pattern
- Inner wall in mosaic pattern
- Newly developed unique metal frame
- It will delight you with its easy maintenance and assembly
- We recommend covering the MARIMEX pool with a cover after swimming
- It has a three-layer laminated film and a reinforced polyester fabric Polystrenght
- The pool includes instructions and plugs for the pool wall passages
- It is important to clean the pool at the end of the season and then store it in a dry, frost-free place
- It is an above-ground swimming pool
Easy maintenance of the MARIMEX pool
The MARIMEX Florida pool will delight you with its easy maintenance and assembly. Simply prepare the pool site, unroll the pool mat, unroll and you're ready to build. Once the support structure is assembled, you put the pool liner on it. After you unpack and assemble the pool, you can start filling the water after 30 minutes. It is important to clean the MARIMEX Florida pool after the end of the season and then store it in a dry, frost-free place. During the winter, it is advisable to move the pool occasionally to prevent the foil from sagging. Thanks to this maintenance, you will extend the life of your pool considerably. To avoid excess mess in the pool, we recommend covering the MARIMEX pool with a cover after swimming.
The MARIMEX pool is made of high quality material
The Florida MARIMEX pool has a three-layer laminated foil and reinforced polyester fabric Polystrenght. The quality design of the pool will guarantee a long life. The outer wall of the pool has a rattan pattern and the inner foil motif has a mosaic pattern. You can connect any MARIMEX cartridge or sand filtration system to the MARIMEX Florida pool. For the connection of the filtration system there are 32 mm (5/4") diameter passages through the pool wall. In order to have everything complete, you need to buy 6 pieces of pool hoses, 2 pieces of pool wall passage and 1 piece of installation kit to connect the filtration. The pool includes instructions and plugs for the pool wall passages.
Additional information:
Diameter of the pool: 3,05 m
Water level diameter: 3,05 m
Pool height: 0,91 m
Total volume of water in the pool: 5,2 m3
Construction: metal construction
The strength of the wall: 0.57 mm
The power of the bottom: 0.28mm
Specifications
Type
Features
Dimensions
Filtration
Volume
| Code: | MARSA037 |
| Warranty: | 24 months |
| Manufacturer information |
Marimex CZ s.r.o., Libušská 221/264a, Libuš, 142 00 Praha 4, [email protected] 
|