Bison Spray Adhesive is a contact spray product designed for bonding common materials such as wood, textiles, paper or cardboard. But it can also handle metal and plastics or foams, such as polystyrene (styrofoam). It can glue both the same material and different types to each other. Depending on the application procedure, gluing can be performed with correction or even removed repeatedly. The glue is suitable for gluing larger areas. Thanks to its spray design, application is easy and fast. Bison Spray Adhesive is resistant to temperatures from -40 to +50 ° C.
Instructions for use:
Shake the contents of the container well before use and apply the glue from a distance of about 15 - 25 cm. After use, place the container upside down and spray the rest of the glue from the spray nozzle. Spray until only the propellant starts to come out of the spray valve.
Contact gluing:
Spray the surfaces to be glued on both sides and let them dry for 10 minutes. Then place the two parts together and briefly press firmly.
Bonding with correction:
It is possible for bonded surfaces where at least one is porous (absorbent). The adhesive can be applied to only one bonded surface and immediately join the two materials. Correction is possible for 5 minutes. Drying time approx. 24 hours.
Removable gluing:
Spray the glue on one surface and let it dry for 20 minutes. A (self-adhesive / still adhesive) layer is created and repeated gluing and peeling off of the material is possible.
Code: | TRADlep038 |
Warranty: | 24 months |
Product Number: | 17968 |