SCYTHE SCMG-2100 Mugen 2 Rev.B

Effective radiator compatible with all current sockets from both Intel and AMD. Cooler uses heatpipes technology where heat is removed from the copper base with five tubes Heatpipe the ribbing, which is attached to the fan with dimensions of 120 x 120 x 25 mm and a speed of up to 1300 revolutions per minute. Fan can be placed on any of the four side of ribs. The entire cooling system is very efficient and effective. Thanks to the automatic speed control and high quality bearings cooler is very quiet.
Heatpipe technology used is based on the closed tube, where the "heated" the end is a liquid with low boiling point, which is beginning to evaporate by heating in a gaseous form of growing 'chilled' end, where it condenses and the walls of the tube is returned to a liquid state back.When heating liquids, waste heat from the chip is used to change state and then in the form of hot steam goes to the opposite end, which must be cooled to a temperature at which vapor condenses. Thanks to the concept used is achieved by a higher cooling effect than conventional coolers.
Parameters and specifications:
Supported sockets: Intel: 478/775/LGA1156/LGA1366 AMD: 754/939/940/AM2/AM2 +/AM3
Fan Dimensions:
120 x 120 x 25 mm

Cooler Dimensions:
130 x 100 x 158 mm
Number of heatpipes:
5
Weight:
870 g
Noise:
26.5 dBA max
Airflow: up to 74.25 CFM

The fan speed:
0 (+200 RPM) - 1300 RPM (± 10%)
Bearing type:
Sliding Bearing