ELÍZ EL 3000 INV WIFI

Thanks to its features, the ELÍZ EL 3000 INV Wi-Fi wall convectors are ideal for heating your home or office. The convector is able to perfectly heat a room up to 32 m² with a power setting of 3000 W. Heating is provided by a long-life stainless steel heating element, and a double aluminium heat exchanger ensures optimal warm air flow. The heater is designed to be mounted on the wall and is only 59 mm thick, so it won't take up too much space. An intelligent electronic control with a colour TFT display is used to set the power between 7 and 28 °C, which switches off when the setting is complete. It is possible to control the convector via Wi-Fi using a mobile phone app - allowing you to conveniently switch on and control the convector from anywhere with internet access.

Economical and safe heating

With the ELÍZ EL 3000 INV Wi-Fi you will certainly welcome the thermostat function, where you can set a wide range of temperatures and modes. The convector is also equipped with an intelligent temperature controller. Using the Inverter function, weekly timer and precise electronic thermostat, the convector saves at least 25% energy. Of course, there is also rollover protection, overheating protection, anti-frost protection and a child lock that locks the control panel buttons. If the power supply is interrupted, the electronics will remember all the set values and the selected modes will automatically start again.

Precise control and comfort

The electronic control with display allows you to easily set the desired temperature, which the convector automatically maintains at the selected value with an accuracy of 0.1 °C. A weekly timer mode can also be set with the option of setting 7 heating intervals for each day of the week, with a different temperature for each interval. The display will go dark after setup and when idle, and you can also adjust its brightness and dimming. Rapid air heating function, Sleep function - sleep mode automatically ensures a gradual reduction of the set temperature by 3 °C for 2 hours after activation.