CO-man Mini C11-L stand-alone carbon monoxide fire detector

The CO-man Mini C11-L carbon monoxide detector is equipped with a high-quality LCD display that shows the current carbon monoxide (CO) concentration level and the last measured value stored in the integrated memory in case of an alarm in your absence. The carbon monoxide detector performs a repeated automatic test of its function. Exceeding the dangerous level of CO is indicated visually and audibly by an alarm. The carbon monoxide detector is equipped with a Test / Hush button, which can be used to verify the correct functioning of the device or to terminate an alarm. A built-in circuit monitors the current battery level and informs you acoustically and on the display if the battery is nearing the end of its capacity.

Installation of CO-man Mini C11-L

The device is installed on the wall of the room or can be used as a mobile CO detector. The detector is easy to install and no technical knowledge is required. The carbon monoxide detector is hung on two screws on the wall ideally at a height of 1.5 m. The battery is inserted into the detector and the detector is then hung. When carbon monoxide is detected, the detector will sound the built-in siren and flash the indicator light. The carbon monoxide detector can also be operated as a mobile detector. Always position it so that the placement meets the same requirements as for wall mounting. Do not place it in drafts or near vents, heaters or air conditioners.