FESTA SHARE20V - 5 machines, bag, charger 28104 (1 × 2 Ah + 1 × 4 Ah)
Don't like the alternatives?
Choose from the full offer
FESTA SHARE20V - 5 machines, bag, charger 28104 (1 × 2 Ah + 1 × 4 Ah)
Convenient set of AKU tools FESTA Power tools, the most commonly used AKU machines, for various types of work with a handy free bag. The machines are part of the FESTA SHARE20V system with the possibility to use Li-ion batteries 2.0 Ah and 4.0 Ah in all machines. The kit also includes a quick charger and 4.0 and 2.4 Ah batteries for normal work is a 2.0 Ah battery (28080). For normal work, a 2.0 Ah battery (28080) is sufficient - charging time is 40 minutes, for work with a higher load, a 4.0 Ah battery (28081) is recommended - charging time 90 minutes. The Li-ion technology used in the FESTA Power x tools batteries offers the possibility to recharge the batteries at any time - without reducing their capacity, and the Li-ion batteries are also very slow to self-discharge.
Key features of the FESTA SHARE20V - 5 machines, bag, charger 28104 (1×2 Ah + 1×4 Ah)
- Convenient set of the most commonly used AKU tools with a handy free bag
- FESTA SHARE20V system allowing sharing of 2.0 Ah and 4.0 Ah Li-ion batteries in all machines
- Li-ion battery without memory effect with slow self-discharge and the ability to recharge at any time
- BRUSHLESS carbon-free engines with higher performance, lower consumption and longer lifetime
- Ergonomic rubberised handles and controls adapted for both right and left hand
- Safety features including an accidental start safety and soft start on the grinder
- Wide range of applications - drilling, screwing, cutting and grinding in various materials
- Comfortable rubberised ergonomic handle of the angle grinder and positioning of controls adapted for both right and left hand
AKU drill with impact driver FESTA "BRUSHLESS" SHARE20V
The BRUSHLESS Impact Driver has a brushless (carbonless) motor with a high power of 80 Nm. The modern BRUSHLESS motor type is more powerful, has lower energy requirements and a longer service life. It is lightweight, powerful and can be used in most materials - metals, wood, plastics and thanks to the tapping also in masonry materials The all-metal gearbox gives the possibility to fully use the maximum power and ensures smooth operation of the AKU drill. It offers infinitely adjustable selection of the type of use by rotary ring, hammer drilling, drilling, screwdriving with a choice of tightening torque in a range of 20 degrees.
Angle grinder AKU FESTA "BRUSHLESS" SHARE20V
Angle grinder AKU BRUSHLESS has a brushless (carbonless) motor with high power (blade max. 125 mm). The modern BRUSHLESS motor type is more powerful, has lower energy requirements and a longer service life, lightweight, powerful and usable for most cutting and grinding jobs. Softstart system starts the grinder without jerking - this is not only gentle on the metal gears in the grinder, it reduces vibrations and especially increases the comfort of work and saves your joints. It has a safety switch lock against accidental start-up, ergonomically shaped and rubberised grip for comfortable holding and handling, three possible positions of the additional handle, positioning of the controls adapted for right and left hand and a quick-release cover.
Circular saw AKU FESTA SHARE20V
Design of the AKU circular saw (blade max 165 mm) designed for a wide range of applications in various professions. The powerful motor ensures easy and fast cutting even with hard materials (also depends on the quality of the cutting wheel! ). It has a safety switch lock against accidental start-up, ergonomically shaped grip parts for comfortable holding and handling while working,safety self-closing disc cover, control positioning adapted for right and left hand and the possibility of connecting the suction. The base is completed with a stop bar for straight straight cuts.
Circular saw AKU FESTA SHARE20V
Design of the AKU circular saw (blade max 165 mm) designed for a wide range of applications in various professions. The powerful motor ensures easy and fast cutting even with hard materials (also depends on the quality of the cutting wheel! ). It has a safety switch lock against accidental start-up, ergonomically shaped grip parts for comfortable holding and handling while working,safety self-closing disc cover, control positioning adapted for right and left hand and the possibility of connecting the suction. The base is completed with a stop bar for straight straight cuts.
AKU eccentric grinder FESTA SHARE20V 125mm 8 holes.
Eccentric AKU grinder (disc max 125 mm, 8 holes) is designed for a wide range of grinding work with wood, metals, sealants, etc. too dry. The rotation of the wheel and its simultaneous eccentric movement ensure efficient grinding performance (also depends on the quality and coarseness of the grinding wheel! ) and at the same time prevents the formation of unwanted rotational grooves. The Velcro fastener ensures quick and easy disc change and an even and firm fit. Eight extraction holes drain the sanded material into a collection bag for less dust and longer life of the sanding disc (clean the bag after each sanding or as needed! ). The shape of the grinder body is adapted for a firm grip and good handling during work.
AKU tail saw FESTA SHARE20V
The design of the AKU tail saw with quick-clamping blade and the comprehensive range of blades allow cutting of metal, wood, plastic, plasterboard, etc. in a wide range of professions - construction, carpentry, locksmithing, gardening, etc. The powerful motor ensures easy and fast cutting even through hard materials. Saw blades - depending on the type - allow not only straight, but also rounded and irregular cuts and cut-outs, but especially to cut in hard-to-reach places - corners, walls, etc. (also depends on the quality of the cutting blade! ). It has a safety switch safety against accidental start-up, ergonomically shaped grip parts for comfortable holding and handling during work and control placement adapted for both right and left hand.
Package contents:
AKU drill with impact driver, angle grinder AKU, AKU circular saw, AKU eccentric grinder, AKU tail saw, 1× 2.0 Ah battery, 1× 4.0 Ah battery, fast charger, transport bag
Technical Specifications:
Drill bits: 0-550 / 0-2000 rpm /min
Drill chuck: 2-13 mm
Weight of the drill without battery: 1.4 kg
Angle grinder speed: 0-8500 rpm. /min
Angle grinder shaft: 22.2 mm, nuts M 14
Weight of angle grinder without battery 1,6 kg
The speed of the circular saw:
0-3650 rpm. /min
Saw shaft: 16 mm
Weight of the saw without battery: 2,7 kg
Speed of the eccentric grinder: 10,000 rpm. /min
Weight of eccentric grinder without battery: 2 × 1 kg
Saw tail speed: 0-3000 rpm. /min
Weight of saw tails without battery 1,7 kg
Recommended maximum depth of cut of the tail saw: wood - 100 mm, steel - 5 mm, non-ferrous metals - 20 mm
Specifications
Battery
Usage
Set contents
| Code: | FEShob064 |
| Links: | Producer's Website: |
| Manufacturer information |
Levior s.r.o., Tovačovská 3488/28, 750 02 Přerov, Česká republika, [email protected], www.levior.cz 
|