AXIS 210A

Very high quality network camera, which can connect to the network using classical network cable.Support for "Power over Ethernet, which is equipped with a camera, providing power from the Ethernet cable itself, is therefore a need to connect to the devices separate power cord, thereby facilitating and also of course cheaper installation.
The main advantage is very high quality image (Motion JPEG and MPEG-4) and high-resolution 640 x 480 points with an excellent number of frames per second (30 FPS) and a microphone built with the support of two-way audio, which can not only see but also hear whats up in the vicinity of the camera or to communicate with persons in the vicinity of the camera.The advantage is that the camera has its own IP address and therefore does not need to connect to a computer.Camera is easy to administer and monitor the image through a standard Web browser, anytime and anywhere in the world, security is addressed through multi-password access directly to the camera is set at 20 people over the Internet is not a limitation.It has also before and after shots alarmovým buffers up to a size 9 MB, which is approximately 5 minutes in resolution 320 x 240 in 4 frames per second.
The parameters and specifications:
Built-in Web server
<!-- StartFragment -> Vstavěná motion detection with pre-and post-alarmovými buffers
Operating temperature:5 to 45 ° C
Humidity:20 to 80% (non-condensing)
Image:
Posting in Motion JPEG and MPEG-4
Hardware resolution:640 x 480 pixels
Resolution videos:160x120, 320x240, 640x480 pixels
Frame rate:30
Interface:
1st RJ-45 socket for a standard network cable 10 / 100 Mbit / s
Dimensions:
146 x 88 x 38 mm
Weight:
325 grams
Communication protocols:
HTTP, FTP, TCP / IP, NTP, DNS
System requirements:
Intel Pentrium III 500 MHz or higher, 128 MB RAM
AGP graphics card min.32 MB, with the support of Direct Draw
Win 98, Win 98 SE, Win 2000, Win Me, Win XP
Accessories:
AXIS IP Utility Software for easy installation