Würth Rust-Stop corrosion protection primer grey, 400 ml
Würth Rust-Stop corrosion protection primer grey, 400 ml
Active corrosion protection and primer for metal surfaces.
Key Features of Würth Rust-Stop Corrosion Prevention Primer Grey, 400 ml
- Good adhesion properties on a wide range of surfaces, including combinations with PU and MS polymer sealants
- Good adhesion properties for aluminium, bare and galvanised sheet metal, steel, old paint, etc.
- Fast drying depending on the layer thickness, can be repainted in about 10-15 minutes
- Resistant to temperatures up to 80 °C, short-term up to 140 °C
- Easy grinding
- Low solvent content
- Complies with the maximum VOC concentration according to the VOC Directive (1999/13/EC)
Use
Vehicle production, shipbuilding, metal and steel structures, manufacture of tools, construction of bridges, manufacture of tanks and containers, pipeline construction, agriculture and forestry, municipal administration, construction machinery, etc. The surface must be clean, dry and free of grease. Remove with a brush, scraper, etc. loose rust, paint and dirt. Problem surfaces should be lightly sanded. Shake the container properly before use. Spray a first thin layer on the surface. Observe the drying time. Drying time 25 minutes, can be repainted after about 10-15 minutes with any common 1- or 2-component or waterborne topcoat.
Notice
After use, turn the container upside down and press the valve until the nozzle is empty.
Specifications
Use
Volume
| Code: | AUPR122041 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
Würth, spol. s r.o., č.p. 137. Nepřevázka 293 01, +420 323 041 141, [email protected] |