Würth Undercarriage protection grey, 1000 ml
Würth Undercarriage protection grey, 1000 ml
Rubber-based coating containing solvents, repaintable. Different structures can be sprayed after changing the distance or pressure. If you use a clear coat, the colour will be darker.
Key Features Würth Underbody Protection Gray, 1000 ml
- Excellent adhesion, fast film formation
- Scratch resistant
- Can be repainted with many commercially available one- and two-component solvent- and water-based paints
- Suitable for short oven drying at 40 to 60 °C
- Can be sanded well after complete drying
Use
For repair and renovation with the original structure and for protection against stones and corrosion in all visible areas, e.g. on the front and rear of the body and on the side elements, bumpers and chassis of cars, trucks and buses. Ideal for use as a wheel arch and chassis deodorizer. Shake well before use. The surface must be clean, dry and free of rust and dust. Apply a very thin layer for better adhesion and let it set for about 3 minutes. Then apply another layer. Allow the layers to dry. Working pressure: 2-4 bar. Optimum spray distance: 30 cm. The best result can be achieved at a processing temperature of 15-25 °C.
Notice
Do not spray on joints, engines, gears and brake systems. After use, turn the container upside down and press the valve until the nozzle is empty. Do not dilute or mix with water or paint. The product can be repainted after 24 hours. It can then be repainted only after sanding and cleaning.
Specifications
Use
Volume
| Code: | AUPR122033 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
Würth, spol. s r.o., č.p. 137. Nepřevázka 293 01, +420 323 041 141, [email protected] |