VIAIR 485C Stealth Black - air compressor, 100% duty cycle at 200 PSI
VIAIR 485C Stealth Black - air compressor, 100% duty cycle at 200 PSI
VIAIR compressors with model designation "C" are designed for filling pressure vessels. They are not equipped with an on/off switch or their own pressure switch. The use of an external pressure switch and electrical relay is recommended and required. All "C" compressors (except 90 and 100 series) are equipped with an armored hose and a control valve to protect the equipment from spikes in current that could damage the compressor. Most VIAIR compressors have a thermal fuse that automatically shuts down the compressor if it overheats. After cooling down, it will restart. The VIAIR 485C is a new generation compressor with a 100% duty cycle at 200 PSI (13.79 bar). Compared to previous versions, it has a redesigned compressor head, redesigned mounting and horizontal cooling fins, which contributes to reduced noise and increased reliability. Equipped with 3/8" NPT threaded armoured hose and 3/8" NPT check valve.
Key Features of VIAIR 485C Stealth Black Air Compressor, 100% working. cycle at 200 PSI
- Designed for filling pressure vessels
- No built-in switch - external pressure switch and relay required
- Armored hose and control valve for protection against current spikes
- Thermal fuse to protect against overheating, automatic restart after cooling
- Compatible mounting base with older VIAIR 480C and 444C models
World leader in product manufacturing
VIAIR is a world leader in the manufacture of air distribution products not only for automotive applications. VIAIR components are used by the most renowned manufacturers of complete air chassis. The products are characterized by quality workmanship, long service life and reliability.
Package contents:
VIAIR 485C compressor, air filter, Set for remote filter placement including hose, Replacement air filter cartridge, installation manual, mounting material, vibration dampers, 3/8" NPT braided hose (male) including 3/8" NPT check valve.
Technical Specifications:
Operating voltage: 12 V
Filling speed: 70 l/min at 0 PSI
Work cycle: 100% at 200 PSI (13.79 bar)
Maximum pressure produced: 200 PSI (13.79 bar)
Maximum recommended pressure vessel volume: 19 l (5 gal)
Maximum current consumption: 23 A
Dimensions (l × w × h): 26,987 × 10,477 × 16,351 cm
Weight: 5,08 kg
Warning:
Always operate the compressor at pressures less than or equal to the maximum operating pressure of the compressor. If the maximum working pressure or duty cycle is exceeded, the compressor may be damaged.
Use a suitable thread sealant for proper installation. Teflon tape is not recommended. The recommended tightening torque is 16 to 20 Nm.
Specifications
Type
Technical parameters
Features
Dimensions and weight
| Code: | AUPRkom16 |
| Warranty: | 36 months |