VIAIR 485C Platinum Dual Pack - Air Compressor Pack, 100% duty cycle at 200 PSI

VIAIR 485C Platinum Dual Pack - Air Compressor Pack, 100% duty cycle at 200 PSI
VIAIR 485C Platinum Dual Pack compressors are designed for demanding applications such as pressure vessel filling. These compressors are not equipped with their own pressure switch, therefore the use of a pressure switch and an electrical relay is recommended and required. "C" models are equipped with an armored hose and a control valve to protect the compressor from damage caused by current spikes. In addition, most VIAIR compressors have a thermal fuse that automatically shuts down the compressor when it overheats, but restarts it when it cools down. The VIAIR 485C compressor offers a 100% duty cycle at 200 PSI (13.79 bar) and features an improved head and bearings for higher duty cycle and lower noise.

Key Features of VIAIR 485C Platinum Dual Pack Air Compressors
- 100% duty cycle at 200 PSI (13.79 bar) for uncompromising performance
- Improved head and fit for higher duty cycle and lower noise
- Equipped with armoured hose and control valve for compressor protection
- Comprehensive accessories in the package including air filter and mounting material
- VIAIR is a leader in long-life, reliable air compressors
High performance and reliability for a wide range of applications
This compressor is supplied with an armored supply hose and 3/8" NPT check valve. The horizontal cooling finned design and redesigned head delivers improved performance and efficiency. The maximum recommended pressure vessel capacity is 19 l (5 gal), making the compressor suitable for a variety of applications. VIAIR is the market leader in air compressors and their products are known for their high quality, reliability and long service life. VIAIR components are popular with renowned air chassis manufacturers due to their precision workmanship and durability.
Warning:
Always operate the compressor at pressures less than or equal to the maximum operating pressure of the compressor. If the maximum working pressure or duty cycle is exceeded, the compressor may be damaged.
Use a suitable thread sealant for proper installation. Teflon tape is not recommended. The recommended tightening torque is 16 to 20 Nm.
Specifications
Type
Technical parameters
Features
Dimensions and weight
| Code: | AUPRkom17 |
| Warranty: | 36 months |
| Manufacturer information |
Escape6 s.r.o., Živcová 872/11 Praha 5, CZECH REPUBLIC, +420222519645, [email protected]
|