Sharks Super power IGBT 190A

Key features of the Sharks Super power IGBT 190A welder

• Welding inverter with the possibility of briefly increasing the current up to 190 A
• ARC FORCE, ANTI STICK and HOT START functions
• Sharks Super power IGBT 190A has compact dimensions
• Rated welding current in the range of 20 - 40 A
• Welding electrodes with a diameter of 1.6 - 5 mm can be used
• The Sharks Super power IGBT 190A inverter has a VRD safety function
• Low weight and built-in handle for easy carrying

Sharks Super power IGBT 190A has practical functions

To make the work with the Sharks Super power IGBT 190A inverter easy for you, this frame is equipped with a lot of useful technologies that will make everything easier for you. The Arc Force function can stabilize the burning electric arc by automatically regulating the current so that the electrode does not stick. However, if the electrode sticks, the Anti Stick function will reduce the welding current to a minimum and you can then easily tear off the electrode. Last but not least, there is the helpful Hot Start function, which increases the starting current by up to 30% (compared to the set value), which facilitates the ignition of the arc. After successful ignition, the current is automatically reduced to the selected value.

Overall dimensions:
300 × 140 × 210 mm

Weight:
4 kg

Output voltage at load:
60 V

Rated welding current:
20 - 140 A

Protection class:
IP21S

Efficiency:
85%

Package contents:
Sharks Super power welder
Power cable 2 m
Welding cable 2 m with electrode holder 300 A
Cable 2 m with earth terminal 300 A
Mask
Brush / hammer