MANIAC - Plastic cleaning and protection 500ml for Car detailing
MANIAC - Plastic cleaning and protection 500ml for Car detailing
MANIAC Plastic Cleaner and Protectant for car detailing is ideal for both interior and exterior car plastics. Thanks to its Anti-UV Technology, it effectively blocks ultraviolet rays. It is stain-resistant, repels water, and dirt in general. The treated surface will require less cleaning and will maintain a new look for a long time. For tired or faded interior plastics, simply dilute the product 1:1 with water to achieve a colour-reviving effect – this versatility lets you tailor the treatment to the specific needs of the material and the desired level of protection. This universal plastic protectant isn't limited to the vehicle's interior; it also protects exterior plastics, such as tyre shoulders, from dirt, contamination, and ageing. It ensures these parts remain flexible, which prevents cracks and damage from ageing, especially during seasonal changes.
Key features of the MANIAC plastic cleaner and protectant for car detailing, 500ml
- Suitable for all interior and exterior car plastics
- Enriches the original colour of treated parts without polishing them
- Stain-resistant – repels water and dirt in general
- Effectively blocks ultraviolet radiation (Anti-UV Technology), which causes discolouration and premature ageing
- Prevents whitening and cracking
- Water-based, pH neutral
- Desired finish can be achieved depending on the chosen dilution
- Non-greasy
Instructions for use:
Before use, ensure you have the following items available:
Graduated bottle: Used to dispense the solution to the desired measurement.Polishing cloth: Ensure it is high quality, dry, and clean.Microfibre pad: Before treating exterior plastic and rubber parts, wash the surface with an all-purpose cleaner (APC) and dry with a clean microfibre cloth.
Dilution: Follow the dilutions below according to the operation you wish to perform. In a graduated bottle, fill with water up to the mark indicating the desired dilution, and then add the product up to the fill mark.
Interior plastics: A 1:1 dilution (one part product to one part water) is recommended for our graduated bottles. The operation is very simple.
Apply the product to a microfibre applicator pad for better application control and even product distribution. Work on small areas at a time for optimal control.
Finishing: Wipe with a clean, dry microfibre cloth to achieve a perfect result.The result will be a full, rich colour, not polished. The plastics will look deeper and revitalised, with a natural and new appearance, regardless of the colour. To achieve a uniform effect, you can spray the solution directly onto the cloth or applicator.
Recommendations:
To prevent the shampoo from drying and causing stains, wash the car in the shade and never in direct sunlight.
If the vehicle has been in the sun or the bonnet is very hot, cool the surface with a stream of cold water.
Start from the top – it's the least dirty part, so you'll avoid getting the mitt dirty: washing will be quicker.
Try using two buckets – put the water and shampoo solution in the first one, and just water in the second to rinse the sponge or mitt often: this will prevent scratching the bodywork.
Wash in small sections – You won't miss any spots, the product will be able to work its best without drying out: you will avoid stains and streaks.
Perfect circles – use a brush to clean the rims to get into the most hidden places.
Specifications
Use
Volume
Type
Features
| Code: | AUPR65322 |
| Warranty: | 24 months |
| Links: | Producer's Website: |