Tank repair agent K2amDV167

Does your petrolhead have unusually high fuel consumption? In case you've figured out that it's caused by a bad fuel tank seal, we have an elegant solution for you. This is exactly the kind of problem that Compass adhesive solves. Its application is completely simple, efficient and, above all, fast. The manufacturer even paid attention to aesthetics. This adhesive is dark in colour, which means that the repaired part of the fuel tank will not be noticeable at first glance. It can also be used in leaking pipe joints, on ships, in radiators, swimming pools, water tanks and gearbox covers.

Key features

• Simple application
• Kyt with steel hardness
• Solves small holes, cracks and joints
• To repair fuel tanks and radiators without disassembly and soldering
• Function is not affected by petrol or water
• Wide range of applications

Special preparation

Glue application couldn't be easier or faster. It fills every small crack, crevice and works even in the presence of gasoline or water. This eliminates the need for lengthy surface preparation and tank draining. After drying, the kyt has high hardness in comparison almost equal to the hardness of steel. The adhesive can even mend cracks in walls or concrete. It will find its irreplaceable place in every home.

Manual

The correct function of the product depends on following the procedure for its application. Therefore, follow the manufacturer's recommendations as much as possible. The areas to be repaired must be cleaned as much as possible. Cut off the required amount of pith. Knead until the colour of the epoxy is uniform. For better handling, wet your palms and then press the epoxy firmly onto the area to be repaired. Depending on the ambient conditions, the epoxy starts to cure from 5 minutes - up to 2 hours. Full curing occurs after 12 hours.