COMPASS Pumping Hose 13 mm × 200 cm
3,350 Ft
COMPASS Pumping Hose 13 mm × 200 cm
Key features of the COMPASS Auto Mechanics Tool, Pumping Hose, 13 mm × 200 cm
- Self-priming hose for transferring liquids, e.g. pumping fuel or draining water
- The self-priming hose works on the principle of gravity, the flow of liquids by self-priming
- The hose is fitted with a metal end acting as a non-return valve
- The end is fitted with a ball to prevent backflow of liquids
Material:
PVC
Instructions for use:
Before starting the liquid transfer, the end of the hose should be placed in the container where the liquid is to be transferred, this container should always be placed lower than the level of the liquid to be pumped. The end of the hose fitted with the valve is placed in the container with the pumped liquid and the tip of the hose is dipped into the pumped liquid several times. In this way, the hose is gradually filled and the liquid then flows arbitrarily. The flow will be terminated by pulling out the intake section.
Whole description
Specifications
Usage
Drive
Manual
Features and functions
Construction material
Metal
Functions
Self-priming
Type
Type
Manual
Usage
Petrol, Nafta
Technical Specifications
Suction hose length
2 m
Suction hose diameter
13 mm
All parameters
| Code: | AUPR122056 |
| Warranty: | 24 months |
| Manufacturer information |
Compass CZ s.r.o., Pražská 17, 250 81 Nehvizdy, CZ, [email protected] Compass CZ s.r.o., Pražská 17 250 81 Nehvizdy, [email protected], +420 326 702 532 
|