ANCEL S160 car smoke leak detector

ANCEL S160 car smoke leak detector
ANCEL S160 smoke leak detector provides a quick way to detect leaks in vehicle systems. With its built-in air pump, you do not need an external compressor – simply connect it to a 12V car battery. The device generates smoke in just 10 seconds, which significantly speeds up diagnostics in professional garages and home workshops alike. Weighing less than one kilogram, it is also highly portable and easy to store.
Key features of the ANCEL S160 smoke leak detector
- Designed for cars, motorcycles, ATVs and light trucks
- Built-in air pump for operation without an external compressor
- Diagnostic smoke generation in just 10 seconds from switch-on
- Switchable operating mode between smoke and air
- Operating pressure of 0.8–14.5 PSI and flow rate under 10L/min
- Dimensions of 25×24×17cm and weight of 0.92kg
- Package includes generator, adapters, hose and power cable
Independence from an external compressor
Thanks to the integrated air pump, the ANCEL S160 detector operates independently of any external compressed air source. To run it, you only need to connect it to a 12V car battery using the supplied clamps. A 2.5-metre smoke supply hose and a power cable of the same length ensure plenty of reach while working. This eliminates the need to lug around a heavy compressor and search for a pressure connection.
Wide range of applications across systems and vehicles
Use this tester for a wide range of vehicles, from cars and motorcycles to ATVs, light trucks and motorboats. Its versatility is further proven by its compatibility with many systems, including EVAP, intake, cooling, EGR, exhaust, vacuum, fuel systems and low-pressure turbochargers. The package includes cone and universal adapters to make connection to most openings easy.
Safe and fast diagnostics
ANCEL S160 allows for fast and accurate location of faults, which may show up as an active check engine light or increased fuel consumption. For safe operation, the device features thermal protection with automatic shut-off outside the working temperature range of −20°C to 90°C. This protects the device from damage in extreme conditions.
Simple operation in a few steps
Operating the detector is simple. Using the included funnel, simply fill it with 10–20ml of test oil, connect the hose to the tested system, and connect the power cable to the car battery terminals. Then simply watch where the smoke escapes. For convenient use, you can hang the device using the hook, for example on the car bonnet, so it does not get in your way while you work.
| Code: | AUPR135601 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
Sunnysoft s.r.o., Kovanecká 2390/1A, Praha 190 00, Czech Republic, +420 222 998 222, [email protected]
|