TP-Link SM6110-SR, Omada
TP-Link SM6110-SR, Omada
The TP-Link SM6110-SR, Omada optical module is used to extend the transmission distance within an Ethernet connection. The multi-mode transceiver operates at a wavelength of 850nm and supports dual transmission speeds of 25.78Gbps and 10.31Gbps. The device complies with SFP+/SFP28 MSA specifications, and the physical connection is made via a duplex LC connector. The module is designed for installation in compatible switches and supports full-duplex Ethernet connections over various distances, depending on the type of optical fibre used. Power is supplied by a 3.3V voltage.
Key Features of the TP-Link SM6110-SR, Omada Module
- The transceiver supports dual transmission speeds of 25.78Gbps and 10.31Gbps
- Power consumption during operation does not exceed 1W
- The signal range is up to 300m when using OM3 multi-mode optical fibre
- The design allows for easy hot-swapping of the module
- The integrated DDM system monitors operating parameters in real time
- Compatibility with SFP+/SFP28 MSA standards and selected Omada series switches
Flexible Installation
The hot-swap design allows the device to be installed or replaced during full operation without having to shut down the entire system. This way, unnecessary network infrastructure downtime can be avoided and overall network maintenance is simplified. The module plugs directly into the SFP+ or SFP28 slot of a compatible active element. The transceiver's dimensions are 13.5×57×14mm, which corresponds to the standard dimensions for these types of optical interfaces.
Diagnostics and Management with DDM
The transceiver integrates Digital Diagnostic Monitoring (DDM). This technology provides an overview of key operating parameters in real time, including current temperature, supply voltage, transmit power and receive power. This gives network administrators accurate data for troubleshooting and monitoring connection stability. The module is designed to operate in a temperature range of 0°C to 70°C and can handle operating humidity from 10% to 90% non-condensing.
Broad Compatibility and Standards Support
The module complies with industry-standard SFP+/SFP28 MSA. It works seamlessly with switches equipped with 25G ports, such as the SX6632YF, and with selected 10G switches, such as the SG3428X and SG3452X. It supports a wide range of network protocols and standards, including IEEE 802.3ae, IEEE 802.3by, TCP/IP, SFF-8402, SFF-8472, SFF-8431, SFF-8432, eCPRI, and CPRI. This makes it easy to integrate into an existing network topology without needing to change other hardware.
Range and Energy Efficiency
The device has low power consumption, not exceeding 1W. The efficient design reduces heat radiation in the rack and contributes to the efficient operation of the entire network while maintaining full performance. The cable length varies depending on the speed and fibre type used. At a speed of 25.78Gbps, the range is 70m on OM3 fibre and 100m on OM4 fibre. For a speed of 10.31Gbps on OM3 fibre, the range extends up to 300m.
Package contents:
SFP module, installation manual
Transfer rate:
25.78Gbps and 10.31Gbps
Max. transmission distance:
300m
Wavelength:
850nm
Connector type:
SFP+, LC (duplex)
Supported standards:
TCP/IP, SFF-8402, IEEE 802.3ae, SFF-8472
Operating temperature:
0°C to 70°C
Dimensions:
13.5×57×14mm
Weight:
0.022kg
Specifications
Features
Supported standards
Type and number of connectors
Wavelength
Dimensions and weight
Package contents
| Code: | TP26104 |
| Warranty: | 60 months |
| Links: | Producer's Website: |
| Manufacturer information |
TP-LINK Czech s.r.o., Pekařská 10a, 15500 Praha 5, Česko, [email protected], www.tp-link.com TP-LINK Czech, s. r. o., Pekařská 695/10, Jinonice, 155 00 Praha 5, CZ +420 212 812 622 / SK +421 233 006 532, [email protected] 
|