TP-Link SM5110LSB-10, Omada
TP-Link SM5110LSB-10, Omada
The TP-Link SM5110LSB-10, Omada SFP+ module is used to extend the range of an optical network and for high-speed data transmission. The transceiver is plugged directly into the SFP+ port of an active network element and converts the electrical signal into an optical signal. The device uses a single optical fibre for bidirectional communication, which reduces cabling costs. The integrated WDM Bi-Di technology divides the transmitting and receiving bands into two different wavelengths. The module is suitable for corporate environments when connecting switches over long distances.
Key Features of the TP-Link SM5110LSB-10, Omada Module
- The transceiver has a transmission speed of 10Gbit/s
- The device supports bidirectional transmission over a single fibre
- The signal range is 10km
- The module has a real-time status monitoring function
- Metal casing
- The design allows the transceiver to be hot-swapped without shutting down the network
Bidirectional Transmission Over a Single Fibre
The transceiver operates on the principle of wavelength division multiplexing, which allows for simultaneous transmission and reception of data over a single single-mode fibre. A wavelength of 1,270nm is used for transmission, and a wavelength of 1,330nm is used for reception. This method of transmission effectively reduces investment in optical infrastructure. This means the user does not have to install duplex cables to ensure full-duplex operation. The module requires a counterpart with opposite wavelengths for a proper link setup.
High Speed
The device supports the 10G Ethernet standard, which provides data transfer speeds of up to 10Gbit/s. This capacity meets the demanding bandwidth requirements of modern data centres and backbone networks. High-speed transmission reduces latency when transferring large amounts of data between servers. The module is backward compatible with selected standards and meets SFF-8431 and SFF-8432 specifications. Connection is via a single LC Simplex optical connector.
Long-Range Optical Signal
The module can transmit data over a distance of up to 10km without signal degradation. This is achieved by using a 9/125µm single-mode optical fibre. The optical signal retains sufficient intensity even when routed between distant buildings on a campus. The low attenuation of single-mode fibre contributes to a stable connection without the need for repeaters. The module is suitable for metropolitan networks and large corporate branches.
Safe Operation
The built-in Digital Diagnostic Monitoring (DDM) function provides network administrators with an instant overview of the transceiver's status. The system monitors temperature, supply voltage, transmission power and received signal level in real time. Diagnostics help to prevent unexpected outages and make it easier to locate any faults on the optical path. The device operates reliably in a temperature range from 0°C to 70°C.
Easy Hot-Swapping
Hot-swappable technology support allows the transceiver to be connected or disconnected without having to shut down the entire network switch. This prevents service interruptions to other connected devices on the network. Hot-swapping the module significantly simplifies maintenance and any potential network infrastructure upgrades. Compatibility with many types of switches facilitates seamless integration into existing rack cabinets. Installation does not require any software configuration or driver installation.
Package Contents:
SFP Module, Installation Manual
Type:
SFP+
Maximum Transmission Distance:
10km
Transmission Speed:
10Gbit/s
Connector:
LC Simplex
Wavelength TX:
1,270nm
Wavelength RX:
1,330nm
Operating Temperature:
0°C to 70°C.
Supported Standards:
IEEE 802.3ae, SFF-8472
Specifications
Features
Supported standards
Type and number of connectors
Wavelength
Dimensions and weight
Package contents
| Code: | TP26106 |
| Warranty: | 60 months |
| Links: | Producer's Website: |
| Manufacturer information |
TP-LINK Czech s.r.o., Pekařská 10a, 15500 Praha 5, Česko, [email protected], www.tp-link.com TP-LINK Czech, s. r. o., Pekařská 695/10, Jinonice, 155 00 Praha 5, CZ +420 212 812 622 / SK +421 233 006 532, [email protected] 
|