Tenda TFC300A Gigabit Media Converter WDM
Tenda TFC300A Gigabit Media Converter WDM
The Tenda TFC300A media converter converts a signal between an Ethernet metallic network and an optical network. The gigabit optical converter changes electrical signals from a classic twisted-pair cable into light pulses and back again. The device operates at a transmission speed of 1,000Mb/s and ensures reliable interconnection of two different physical interfaces. The robust metal construction with integrated surge protection up to 6kV withstands external influences at operating temperatures from 0°C to 45°C. The metal chassis measuring 72 × 26 × 9.5mm allows for easy placement in cabinets or on work desks. Power is supplied by an external power adapter, providing a stable voltage of 5V DC at a current of 0.6A. The converter's efficient power consumption does not exceed 3W at full load.
Key Features of the Tenda TFC300A Media Converter
- The device transfers data at a speed of 1,000Mb/s
- WDM technology requires only one optical fibre
- The metal casing increases mechanical durability
- Surge protection withstands surges up to 6kV
- The SC optical interface works over a distance of 3km
- Installation requires no software setup
WDM Technology and Range
The converter uses advanced WDM technology, which allows for bidirectional data transmission over a single optical fibre. The system works with different wavelengths, using 1,550nm for transmitting (TX) and 1,310nm for receiving (RX). A WDM converter effectively reduces the cost of optical cabling because it does not require a pair of fibres for a full-fledged connection. The device supports the connection of a single-mode optical fibre with a diameter of 9/125 micrometres via a SC connector with UPC polishing. With this type of cable, the maximum transmission distance of the interface reaches up to 3km. The gigabit optical converter is suitable for interconnecting remote network nodes within industrial areas or city districts.
Compatibility and Simple, Configuration-Free Connection
The RJ45 metallic port supports speeds of 10/100/1,000Mb/s with Auto-Negotiation and automatic crossover cable detection (Auto-MDI/MDIX). A counterpart with reversed wavelengths for transmitting and receiving must be placed on the opposite side of the optical path. For this purpose, the manufacturer recommends the fully compatible Tenda TFC300B counterpart converter. Installation is fully plug-and-play, requiring no software setup or parameter configuration. Simply connect the network cables, and the device will immediately start transferring data between the metallic and optical ports. The SC-RJ45 converter offers clear LED indication for instant monitoring of the power status and activity on both lines.
Package Contents:
Converter, power supply
Specifications
Features
Wavelength
Dimensions and weight
Package contents
| Code: | Tenda25024 |
| Warranty: | 36 months |
| Links: | Producer's Website: |
| Manufacturer information |
INTELEK LTD, organizační složka, Ericha Roučky 1291/4, Brno, 627 00, Czech Republic, www.intelek.cz, 533 338 858, [email protected] INTELEK LTD, organizační složka, Ericha Roučky 1291/4, Brno, 627 00, Česká Republika, [email protected], +420 533 338 888, www.tenda.cz 
|