Tenda T10 WiFi extender with LAN port
Tenda T10 WiFi extender with LAN port
The Tenda T1 indoor single-band WiFi extender expands and boosts your existing wireless network in areas with a weak or unavailable signal. The device operates on the 2.4GHz band and supports 802.11b, 802.11g, and 802.11n wireless standards, collectively known as WiFi 4. This plug-in network component achieves transfer speeds of up to 300Mb/s. Weighing 0.2kg, it is designed for installation in the Czech Republic, Slovakia, Hungary, Germany, Austria, Poland, Slovenia, Russia, Romania, France, and Croatia.
Key features of the Tenda T10 WiFi extender
- Single-band 2.4GHz operation with support for 802.11b/g/n standards
- Wireless data transfer speeds of up to 300Mb/s
- Integrated RJ-45 LAN port with a transfer speed of 100Mbit
- Two non-detachable internal antennas with 3dBi gain
- LED signal strength indicator for finding the optimal socket location
- Supports two operating modes: Repeater and AP
- Wireless network security with WPA2-PSK and WPA-PSK encryption
Reliable coverage and two operating modes
The device effectively covers dead spots in your home or office where the original wireless signal is too weak or completely unavailable. Two internal, non-detachable antennas with 3dBi gain help to spread a stable signal to more remote areas. The total transfer speed reaches up to 300Mb/s on the 2.4GHz frequency, which is more than enough for everyday web browsing, managing emails, and ensuring a stable data connection throughout the designated area. The device offers flexible use within your network infrastructure by supporting two different operating modes. In Repeater mode, it repeats and boosts the existing wireless signal from your main router to other rooms. In AP mode, it functions as an access point, receiving an internet connection via an RJ-45 cable and then broadcasting a new wireless network for end-user devices. The built-in LAN port remains fully active in both modes.
Connection options and simple pairing
The plastic body houses one 100Mbit Ethernet LAN port. The physical RJ-45 connector makes it easy to connect wired devices directly to the wireless network without needing to install additional receivers. You can use the included cable to connect devices like a games console or television, even in places without a direct signal from the main router, which eliminates the need to run long cables from the central part of the building. Setup and network configuration are very fast thanks to the integrated WPS function on the device. To pair successfully, simply press the corresponding button on this extender and then do the same on your existing home router. The configuration settings remain permanently stored in the device's memory even after it has been completely unplugged, so you can move the extender as needed without having to set it up again.
Optimal placement indication and data transfer security
On the outer chassis, there is an LED signal strength indicator that helps you quickly find the most suitable socket. The diode visually displays the quality and stability of the signal reception from the existing wireless network in that specific location. The status of the indicator makes it easy to determine the best place for installation, ensuring the subsequent wireless data transfer is as stable as possible and avoiding unwanted connection drops due to excessive distance from the source. Wireless security is ensured by several encryption standards to prevent unauthorised access. The device supports WPA, WPA2, WPA-PSK, and WPA2-PSK protocols, which protect transmitted data from misuse. The network architecture is compatible with the modern IPv6 Ready protocol, supports the NAT UPnP function for automatic network port configuration, and allows the broadcasting of a maximum of 1.0 wireless SSID.
Package contents:
Tenda T10 WiFi extender, Ethernet cable
Transfer speed:
300Mb/s
WiFi bands:
2.4GHz
Standards:
802.11b, 802.11g, 802.11n
WiFi type:
WiFi 4
Number of internal antennas:
2
Antenna gain:
3dBi
Number of 100Mbit LAN ports:
1× RJ-45
Encryption:
WPA, WPA2, WPA-PSK, WPA2-PSK
Specifications
Usage
Type
Speed
Standards and frequency
Connectors
Security
Antenna features
Advanced parameters
Number of LAN ports
Dimensions and weight
Colour
Package contents
Power outlet type
| Code: | Tenda25031 |
| Warranty: | 36 months |
| Links: | Producer's Website: |
| Manufacturer information |
INTELEK LTD, organizační složka, Ericha Roučky 1291/4, Brno, 627 00, Czech Republic, www.intelek.cz, 533 338 858, [email protected] INTELEK LTD, organizační složka, Ericha Roučky 1291/4, Brno, 627 00, Česká Republika, [email protected], +420 533 338 888, www.tenda.cz 
|