Peak Design Capture (v3) silver
Peak Design Capture (v3) silver
Improvements on the Previous Version, the Capture v2
- Significantly smaller - 30% lighter, 20% narrower and 20% lower profile than the Capture v2
- All-metal construction - aluminium alloy chassis, backplate, quick-release button and stainless steel locking pin
- Anodized surface - higher resistance and surface smoothness
- Stability - embedded grip in backplate
The Peak Design Capture (v3) Is Compatible with Arca and Manfrotto
Attach the metal clip to a belt, backpack or strap with a maximum width of 6.4cm and a thickness of 2.2cm (wider belts can be easily compressed). The pack includes the Standard Plate compatible with the Arca system that attaches directly to the camera. Just attach the camera with the fixed plate to the clip where it will be held firmly and securely, whatever you do. You can quickly and easily remove it by pressing the lock-release button that also prevents accidental release or theft. Peak Design Capture (v3) is also compatible with Manfrotto RC2 - just buy the Capture clip without the plate, and instead purchase the Dual Plate.
Key Features of the Peak Design Capture (v3)
- Includes the Standard Plate
- Suitable for any camera
- Release the camera by pressing the quick-release button
- Plate locks into clip in all four directions - fast and secure lens change
- Resistance to salt water and rust
All-Metal Build with High Load Capacity
The Peak Design Capture (v3) can hold up to 90 kilograms, making it suitable for a variety of professional camera and lens combinations. The package includes thumb-drive bolts (tightened by hand) and hex-drive bolts (tightened by an Allen key) for permanently attaching the Capture to a backpack strap.
Accessories
Peak Design Capture (v3) can be purchased with the BINO Kit, for example, which lets you carry the camera's binoculars. Using the Lens Kit, you will be able to quickly and easily change lenses, and you can even mount GoPro cameras with the POV Kit.
Package Contents
- 1× Capture clip
- 1× Standard plate
- 2× Thumb-drive bolts (hand tightening), 2× Hex-drive bolts (Allen key tightening)
- 1× Allen key 4mm
- 1× Microfibre bag
Additional Information
Dimensions:
clip: 8.3 × 4 × 2cm
plate: 3.8 × 3.8 × 0.7cm
Material:
CNC aluminium
anodised finish
moulded PVC pad
iron bolts with an oxide finish (hex-drive bolts) and iron/aluminium anodised bolts (thumb-drive bolts)
Weight:
clip: 70g (including bolts)
plate: 14g
Compatibility with Straps:
Can be attached to any strap with a width of up to 6.4cm (wider straps can be compressed) and thickness up to 1.5cm (with thumb-drive bolts) or 2.2cm (with hex-drive bolts)
Compatibility with Previous Models:
Can be used with all Peak Design Plates except DUALplate v1. Can be used with a Pro Pad v2, but not with the older version v1. The Standard Plate package is not compatible with older Capture models (v1 and v2).
Specifications
Colour
Compatibility
Load capacity
Mounting
Location
Features
Dimensions and weight
Packaging
| Code: | PD00085 |
| Warranty: | 24 months |
| Links: | Producer's Website: |