Napájení zdroj TAGAN Easycon TG580-U15 530W ATX 2.0

Show alternatives
Product accessories
Don't like the alternatives?
Choose from the full offer
Napájení zdroj TAGAN Easycon TG580-U15 530W ATX 2.0
High-quality power supply to power 580 W suitable for home computers and small servers.The power is used two separate branches, one for the CPU and motherboard and the other for other peripherals.It is thus ensure a high stability and equitable burden of power branches.In addition, the two branches can combine that with the benefit of owners use gaming groups with two graphics cards.With the system active PFC (protection against interference with nearby electrical appliances and recover the harmonious radiation to the network) offers maximum reliability, stability and very high performance.
It is equipped with two PCI Express connectors with improved EMI shielding and four Serial ATA power connectors.Power supply to the motherboard meets the specifications ATX 2nd01, and of course is to support the older format ATX boards 1st3rdThere are connectors for the configuration of 20, 20 +4, 24 +4 and 24 +8.For other peripherals are available six classic molex connectors, and another two are reserved for the graphics card.The cooling of the old silent 120 mm fan with speed controlled according to temperature and noise 28 dB at maximum load resources.
The advantage is also detachable cables, you can involve only those who really need and the uvolněnému place will improve the flow of air inside the computer case.Connectors are gold-plated, and their shape is formed so as to not confuse each other.Source is also equipped with overvoltage protection, which limits the maximum output voltage to individual branches, then the current maximum limit and ultimately protect against short circuit automatically turn off the source of the emergence of any similar type of problem.
The parameters and specifications:
Supported platforms: Intel Pentium 4 / Xeon and AMD Athlon XP / Athlon 64 / Opteron
Format:
ATX 2nd01, 13
Performance:
580 W
In +3.3 branch:26 A (maxload)
+5 V branch:30 A (maxload)
+12 V branch 1:20 A (maxload)
+12 V branch 2:20 A (maxload)
-5 In branch:0.8 A (maxload)
-12 The branch:1 A (maxload)
+5 VSB branch:2.5 A (maxload)
+ 12 branches in 1 +2:35 A (maxload)
The combined load (3.3 V 5 V 12 V):560 W
Output connectors:
1 x 20 +4 pin ATX / EPS
1 x 4 / 8 pins 12 V
6 x 4-pin Molex
2 x 4-pin VGA
2 x 4 pins for the Floppy
4 x 5 pins for the Serial ATA
2 x 6 pins for PCI Express
1 x GND (uzemění)
Fan:
1 x 120 mm in resources
Speed:about 400 - 1900 rpm
21 dB at 533 rpm - 20% load
28 dB at 1827 rpm - 100% load
Dimensions:
150 x 160 x 86 mm
It is equipped with two PCI Express connectors with improved EMI shielding and four Serial ATA power connectors.Power supply to the motherboard meets the specifications ATX 2nd01, and of course is to support the older format ATX boards 1st3rdThere are connectors for the configuration of 20, 20 +4, 24 +4 and 24 +8.For other peripherals are available six classic molex connectors, and another two are reserved for the graphics card.The cooling of the old silent 120 mm fan with speed controlled according to temperature and noise 28 dB at maximum load resources.
The advantage is also detachable cables, you can involve only those who really need and the uvolněnému place will improve the flow of air inside the computer case.Connectors are gold-plated, and their shape is formed so as to not confuse each other.Source is also equipped with overvoltage protection, which limits the maximum output voltage to individual branches, then the current maximum limit and ultimately protect against short circuit automatically turn off the source of the emergence of any similar type of problem.
The parameters and specifications:
Supported platforms: Intel Pentium 4 / Xeon and AMD Athlon XP / Athlon 64 / Opteron
Format:
ATX 2nd01, 13
Performance:
580 W
In +3.3 branch:26 A (maxload)
+5 V branch:30 A (maxload)
+12 V branch 1:20 A (maxload)
+12 V branch 2:20 A (maxload)
-5 In branch:0.8 A (maxload)
-12 The branch:1 A (maxload)
+5 VSB branch:2.5 A (maxload)
+ 12 branches in 1 +2:35 A (maxload)
The combined load (3.3 V 5 V 12 V):560 W
Output connectors:
1 x 20 +4 pin ATX / EPS
1 x 4 / 8 pins 12 V
6 x 4-pin Molex
2 x 4-pin VGA
2 x 4 pins for the Floppy
4 x 5 pins for the Serial ATA
2 x 6 pins for PCI Express
1 x GND (uzemění)
Fan:
1 x 120 mm in resources
Speed:about 400 - 1900 rpm
21 dB at 533 rpm - 20% load
28 dB at 1827 rpm - 100% load
Dimensions:
150 x 160 x 86 mm
Whole description
Specifications
| Code: | UE243a |