Montech AIR 100 LITE White

11,280 Ft

Montech AIR 100 LITE White

The Montech AIR 100 LITE computer case in white is the perfect foundation for building compact gaming stations and work PCs in the Mini Tower format. The steel construction supports Micro ATX and Mini ITX motherboards, with the main emphasis on intense airflow through the fine-mesh front panel. The internal architecture provides plenty of space for installing long graphics cards and tower CPU coolers, meeting the demands of modern hardware. The tempered glass side panel on rotating hinges allows for easy visual inspection of components and quick access for maintenance or upgrades without needing a screwdriver.

PC case

Mini Tower

Case size
PC case

161mm

Max. CPU cooler height
PC case

330mm

Maximum graphics card length
PC case

2×

Number of installed fans
PC case

2×

Total number of fan positions
Montech AIR 100 LITE White

Key features of the Montech AIR 100 LITE computer case

  • Supports mATX and mITX motherboards
  • Includes two pre-installed fans
  • Tempered glass side panel on rotating hinges
  • Internal space accommodates long graphics cards
  • Top panel offers USB 3.2 Gen 1 and USB 2.0 connectors
  • Dust filters protect components from dirt
  • Construction supports water cooling installation

Minimalist design with a fine mesh grille

The front panel is made of a fine mesh that acts as a dust filter while allowing for massive airflow. The steel construction gives the whole case the necessary strength and stability. The front grille acts as a barrier against dirt but lets cool air flow directly to the heated components. Users can easily remove the front panel for cleaning without any tools.

Montech AIR 100 LITE White
Montech AIR 100 LITE White

Montech AIR 100 LITE tempered glass side panel

The left side is enclosed by a tempered glass panel, providing an unobstructed view of the installed hardware. The side panel uses hinges for easy opening and instant access to the computer's internal parts. The glass has no drilled holes, which significantly increases its resistance to cracking. The swing-out mechanism is ideal for anyone who frequently changes components or cleans the inside of their computer.

Pre-installed fans for effective cooling

The manufacturer has fitted the case with two 120mm fans in a push-pull configuration to immediately dissipate accumulated heat. One fan draws in fresh air from the front, and the other exhausts it out the back. This solution ensures stable temperatures right out of the box. The fans connect via a 3-pin connector, and their speed can be adjusted according to the current system load.

Montech AIR 100 LITE White
Montech AIR 100 LITE White

Water cooling support in the Montech case

The space inside can accommodate water cooling radiators up to 280mm at the front, which is sufficient even for high-performance processors. The top position offers space for a 240mm heat exchanger if the user prefers to exhaust heat through the top of the case. The chassis supports water cooling radiators sized to match the standards of compact builds. The cooling flexibility enables future upgrades to more powerful solutions without needing to replace the case.

Space for powerful components

The internal layout accepts graphics cards up to 330mm in length, which includes most modern gaming accelerators on the market. The processor cooler can reach a height of 161mm, so even robust tower coolers will fit inside. The case therefore accepts graphics cards with a length sufficient even for high-end mATX builds. PC builders don't have to compromise on performance due to the case's smaller dimensions.

Montech AIR 100 LITE White
Montech AIR 100 LITE White

Drive bays in the Montech AIR 100 LITE

Users have slots available to install two 3.5" hard drives or 2.5" SSDs in a combined cage. Two additional positions are dedicated exclusively to 2.5" drives, which are mounted on the back of the motherboard tray. The ATX format power supply is placed in the bottom tunnel, which separates its heat from the rest of the system. This layout contributes to better organisation and airflow throughout the entire build.

Connectivity and cable management

The top panel includes two USB 3.0 ports and one USB 2.0 port for quick connection of external drives or peripherals. Pre-installed Velcro straps and strategically placed grommets make it easy to route cables behind the motherboard. The panel offers two ports and one connector for plugging in headphones and a microphone via separate 3.5mm jacks. Clean cable management not only improves the look but also the airflow inside the case.

Montech AIR 100 LITE White

Dust protection on the Montech AIR 100 LITE

In addition to the front grille, the internal space is protected by a magnetic filter on top and a slide-out filter under the power supply. These elements capture fine dust particles and prevent them from settling on fan blades or cooler fins. The filter system protects the internal space and components effectively, thereby extending their lifespan. Maintaining and cleaning the filters takes minimal time thanks to their easy removal.

Montech AIR 100 LITE White
Montech AIR 100 LITE White
Montech AIR 100 LITE White
Montech AIR 100 LITE White

Motherboard formats

  • mATX (Micro ATX)
  • mITX (Mini ITX)

Fans

  • Front fan size: 120mm
  • Rear fan size: 120mm
  • Number of rear fans: 1× 120mm
  • Number of front fans: 3× 120mm

Ports

  • USB 2.0
  • USB 3.2 Gen 1
  • 3.5mm jack (headphones)
  • 3.5mm jack (microphone)

Specifications

Usage and size

Size Mini Tower
Location Freestanding

Colour

Colour White

Internal structure

Motherboard form factor mATX (Micro ATX), mITX (Mini ITX)
Number of internal 2.5" slots 2×
Number of internal 2.5"/3.5" slots 2 ×
Max. processor heat sink height 161 mm
Max. graphics card length 330 mm

External structure

Front panel location top
Front panel connectors USB 2.0, USB 3.2 Gen 1, 3.5mm jack (headphones), 3.5mm jack (microphone)
Sidewalls Transparent
Side panel material Tempered glass
Additional equipment Transparent door

PSU

Power supply Without power supply
Supported PSU format ATX

Cooling system

Front fan size 2x120mm
Rear fan size 1x120mm
Number of fan positions 3×
Number of mounted ventilators 2×120mm
Supported radiator size on top 120mm
Supported radiator size from the front 120mm

Backlight

Backlight colour No backlighting

Material

Wardrobe material Steel

Dimensions

Width 210 mm (21 cm)
Height 475 mm (47.5 cm)
Depth 425 mm (42.5 cm)
Weight 7.26 kg
Code:  MONa100a2
Warranty: 24 months
Links: Producer's Website: