M-Audio Sputnik

Tube microphone M-Audio Sputnik is the perfect tool to record audio with a classic touch of old times. It uses cutting-edge, off basis levied pentode 6205 (Wired as a triode) with inverse saving without thread. The result is an open reading with high purity and minimal staining. 24K gold-bearing membrane then take care of every single detail capture input.
Three selectable polarity and perfectly tuned brass pad Sputnik ensure quality scanning in any application. To adapt diverse users and their individual needs will also serve 10 db attenuation switch a high-pass filter at a frequency of 80 Hz, the slope of 12 dB/octave (high-pass filter). The package can also 7pinový cable for connection to a dedicated power supply and resilient spider. Everything is carefully stored in an aluminum case.
Key elements:

• Built-in tube preamp (Fitted with hand chosen pentode triode involvement in 6205).
• 1 "(2.5 cm) plated membrane.
• 10 db attenuation switch and filter at 80 Hz (12 dB/octave).
• Extravagant design chromium lollipops.

Specifications:
Sound characteristics:
Type: tube condenser microphone
Membrane: 1 ", with the surface of 24-karat gold 3mikronů
Electron: 6205 pentode, wired as a triode
Polar Pattern: Cardioid/octal (Figure-Eight)/omnidirectional
Frequency response: 20 Hz - 20 kHz, ± 1 dB
Sensitivity: 30 mV/Pa (-30.5 dBV)
Max. SPL for 0.5% THD 132 dB/142 db to 10 db attenuation using
Output impedance: 200 ohms
Recommended impedance: 1 Kohm
Design:
Dedicated power supply (included)
Connector: 7pin cable
Dimensions: 210 x 76 x 50 mm (H x W x H)
Weight: 726 g