Hutt A1
Hutt A1
The HUTT A1 robotic window cleaner makes regular care of windows and other smooth vertical surfaces easier. An intelligent algorithm automatically plans the movement path and adapts the suction power to the properties of the surface and its level of dirt. This elegant helper can clean windows, mirrors, glass doors and smooth tiles, while the pulse water spray system and nanofibre cleaning pad help remove both common and more stubborn dirt.
Key Features of the HUTT A1 Robotic Window Cleaner
- Intelligent HUTTHINK algorithm with automatic suction power regulation
- Maximum peak suction power of up to 6,000Pa
- Intelligent path planning
- Three cleaning modes – Z-shaped path, N-shaped path, and edge cleaning
- Up to 99.5% coverage of the cleaned area
- Improved cleaning near frames and corners
- Bidirectional pulse water spraying
- 150ml water tank
- Cleans an area of up to 90m² on a single tank fill
- Nanofibre cleaning pad for wet and dry cleaning
- 13 precise sensors for monitoring edges, obstacles, and adhesion
- Pressure change compensation within 0.03 seconds
- Backup protection during a power outage for at least 20 minutes
- Audible alarm in an emergency situation
- Safety rope resistant to a tensile force of up to 148kg
- Anti-slip tracks for stable movement on the cleaned surface
- Improved brushless motor
- Control via a button or remote control
- Voice prompts for the current operating status
Make cleaning easier with the HUTT cleaner
The HUTT A1 uses intelligent motion planning, which allows it to systematically move across the surface being cleaned. Using the remote control, you can choose between a Z-shaped path, an N-shaped path, and edge cleaning. The robot achieves up to 99.5% coverage of the cleaned area, and its design improves cleaning near frames and corners. After completing the cycle, it automatically returns to near its starting point, from where you can conveniently remove it.
Stable Adhesion to Glass
The HUTT A1 robotic window cleaner uses intelligently regulated suction with a maximum peak power of up to 6,000Pa. A total of 13 precise sensors continuously monitor edges, obstacles, and the device's adhesion, and the system can compensate for pressure changes in just 0.03 seconds. In the event of a power cut, a backup battery is activated, which keeps the robot attached to the glass for at least 20 minutes while simultaneously triggering an alarm. A safety rope, resistant to a tensile force of up to 148kg, provides additional protection when working at heights.
Nanofibre Pad for Effective Cleaning
The nanofibre cleaning pad helps to capture dust, dried droplets, bird droppings, pen marks, and other common dirt. The bidirectional pulse spray keeps the pad evenly damp, while the 150ml tank is sufficient to clean an area of up to 90m². You can use clean or distilled water, or a non-corrosive glass-friendly cleaner. After finishing work, simply soak the pad, gently clean it with a soft brush, and let it dry thoroughly.
Easy Operation for Fewer Worries
Operating the HUTT A1 robotic cleaner is simple and intuitive. The device can be started with a single button, and with the remote control, you can change the movement path, turn the water spray on or off, pause or resume cleaning, or manually guide the robot in the desired direction. Voice prompts keep you informed about the current operating status. Anti-slip tracks and an improved brushless motor ensure smooth movement, stability, and a long service life for the device.
Specifications
Power Supply
Colour
Features
Functions
Noise level
Dimensions and weight
| Code: | HURCO006 |
| Warranty: | 24 months |