Archive - Irrigation Systems
Choose an alternative in the category
Irrigation Systems
86 Results
Gardena Mds-T-piece 1/2" with Thread
Discontinued
Hose Coupling - 1/2" diameter, for hose attachment, 2-way distribution board coupling, made from plastic, adjustable
Gardena Mds-Cross Piece 4.6mm 3/16
Discontinued
Hose Coupling - 3/16" diameter, for hose attachment, 4-way distribution board coupling, made from plastic, adjustable
Gardena Mds-adjustable Inline Dripper
Discontinued
Drip-System - for in-line irrigation of plants with different water needs, flow control: 1 - 8 l/h, pressure equalization (1 - 4 bar) for constant even extraction, independent of...
Gardena Mds-L-piece 4.6mm 3/16"
Discontinued
Pipe Coupling - 3/16" diameter, for hose attachment, coupling connection, made from plastic
Gardena Mds-Pipe Clamp 1/2"
Discontinued
Pipe Coupling - for fixing the pipe on a solid base and for the defined fixation of the spray nozzles in the laying and distribution pipe
Gardena Extension Pipe for Oscillating Sprinkler OS 90
Discontinued
Garden Pipe - for oscillating sprinkler OS 90, length: 20cm, 2 pcs
Gardena Mds-Shut-off Valve 13mm 1/2"
Discontinued
Hose Coupling - 1/2" diameter, for hose attachment, coupling connection, made from plastic
Gardena Mds-Shut-off Valve 3/16"
Discontinued
Hose Coupling - 3/16" diameter, for hose attachment, coupling connection, made from plastic
Gardena Mds-Spray Nozzle 90°
Discontinued
Nozzle - for surface irrigation of beds with fine spraying, range approx. 3m
Gardena Mds-Basic Reduction Device 1000
Discontinued
Reduction Device - reduces the initial water pressure to an operating pressure of approximately 1.5 bar for optimum system performance, flow rate up to 1000l/h
Gardena Micro Rotor Sprinkler 360°
Discontinued
Irrigation Device hose compatible, circular, spike, irrigation angle 360 °, max. water range 3m, adjustable irrigation surface
Gardena Mds-Connector 4.6mm 3/16"
Discontinued
Hose Coupling - 3/16" diameter, for hose attachment, coupling connection, made from plastic
Gardena Mds-Cross 13mm 1/2"
Discontinued
Pipe Coupling - 1/2" diameter, for hose attachment, 4-way distribution board coupling, made from plastic
Gardena Mds-Distribution Pipe 3/16", 15m Roll
Discontinued
Distribution Pipe - for drips and spray nozzles, stabilized against UV radiation
Gardena Mds-Basic Reducer 2000
Discontinued
Reduction Device - reduces the initial water pressure to an operating pressure of approximately 1.5 bar for optimum system performance, flow rate up to 2000l/h
