Intex 28006 Automatic Pool Vacuum Cleaner ZX100
Intex 28006 Automatic Pool Vacuum Cleaner ZX100
Clean pool floor with the Intex 28006 vacuum cleaner
The Intex 28006 ZX100 AUTO POOL cleaner is designed for effective cleaning of the floor of above-ground pools with a tubular frame and operates fully automatically. Thanks to its ability to move and turn on its own, it travels along the pool floor and helps remove settled dirt, getting the water ready for a pleasant summer swim.
Key Features of the Intex 28006 ZX100 Automatic Pool Cleaner
- Automatic movement across the pool floor
- Automatic turning during operation
- Suitable for above-ground pools with a tubular frame
- Cleaning speed of up to 5 m/min
- 6.5m hose
- Fine 0.3mm mesh filter
- 0.8L collection container
- Easy to operate
- Can be used in salt water up to 5,000 ppm
Automatic Operation
A major advantage of the Intex 28006 cleaner is its movement speed of up to 5 metres per minute, which allows for quick cleaning of the pool floor. It connects to the filtration system using a 6.5-metre-long hose. For proper function, the cleaner requires a filter pump with a flow rate of 3,407 to 5,678 litres per hour, with a higher filtration performance contributing to even better cleaning results.
Captures Even Fine Debris
The Intex 28006 ZX100 cleaner ensures high-quality filtration with a fine mesh filter with a 0.3mm mesh size. It can capture not only larger debris but also fine sediment, sand, or small particles settled at the bottom of the pool. The collected dirt is stored in the integrated 0.8-litre container, which can be easily emptied to prepare the cleaner for its next use.
For Above-Ground Pools and Salt Water
The Intex 28006 cleaner is designed for above-ground pools with a tubular frame equipped with wall bushings and a 38mm inlet fitting. The device is not compatible with pools that have an inflatable ring or a steel frame with a built-in skimmer. Its design also allows it to be used in salt water with a maximum salt concentration of 5,000 ppm, however, rinsing with clean fresh water is recommended after each use to help prevent salt build-up and extend the life of the appliance.
Specifications
Power Supply
Type
Suitable for
Features
Filtration
Dimensions and weight
Brushes and cleaning
| Code: | WSaaa6501 |
| Warranty: | 21 months |
| Links: | Producer's Website: |
| Manufacturer information |
Intex trading s.r.o. Benešovská 23, 101 00 Praha 10, Česko www.intexcompany.cz, +420267312645 
|