BISON EPOXY 5 MIN 24 ml adhesive is solid and clear. Epoxy adhesive BISON EPOXY 5 MIN is designed for fast and as visible as possible gluing of porcelain, ceramics, glass, skin, wood, chipboard, stones, concrete, metals, hard PVC, expanded polystyrene, laminates and some plastics. Nabízí průzračnou čirost, zpracovatelnost 5 minutes a pevnost 100 kg/cm2. BISON EPOXY is waterproof and can also withstand oils, solvents, dilute acids or alkalis. Thanks to the heat resistance from -40 to +100 ° C, it is also suitable for outdoor conditions. Great for joints and cracks. After hardening, BISON EPOXY 5 MIN can be overpainted. Handling strength after 20 minutes depending on temperature. Curing after 24 hours.
BISON EPOXY 5 MIN is best used at a temperature of 5 to 35 ° C. Remove the red cap between the two pistons, break off the end of the nozzles, squeeze out the epoxy glue and mix until an even colour is obtained. Apply BISON EPOXY on a clean, dry or degreased surface and apply a glued object, press and possibly fix it with a clamp or other object until the joint hardens. Processing time is 5 minuteses . After use, close the glue with a cap that you break out of the pistons. Store in a dry and cool place.
Volume:
24 ml
Open processing time:
5 minutes
Final strength:
100 kg/cm2
Heat resistance:
from -40 ° C to +100 ° C
Handling strength:
after 20 minutes
Curing:
after 24 hours
| Code: | TRADlep003 |
| Warranty: | 24 months |
| Product Number: | 1713 |