Flashforge Hyper PLA 1,75mm 1kg Fire Engine Red
4,890 Ft
Flashforge Hyper PLA 1,75mm 1kg Fire Engine Red
The Flashforge filament is a refill for 3D printers. The filament has the ideal parameters for the exact printing of every minute detail. You will appreciate its quality and the absence of the typically unpleasant smell. The Red colour of this 3D printer filament will stay the same for a very long time. Its weight is roughly 1 kg. The nozzle temperature may reach 240 °C as the printing takes place. The temperature of the pad should be set to 60 °C. The Flashforge filament is made of PLA. The compound PLA is known due to its biodegradability, versatility and great workmanship evident from the first glance. The diameter of each string is 1,75 mm. The tolerance of the diameter is 0,02 mm.
Flashforge Hyper PLA 1,75mm 1kg Fire Engine Red Filament Key Features
- Recommend speeds for printing are from 50 to 350 mm/s
- Red printing filament from Flashforge for 3D printing
- Made of PLA
- No unpleasant smells and low bubble formation
- Diameter of 1,75 mm is ideal for printing small and light objects
- Total weight of the packaging is 1 kg
Whole description
Specifications
Colour
Colour
Red
Material
Material
PLA
Dimensions
String diameter
1.75 mm
Diameter tolerance
0.02 mm
Weight
Weight
1 kg
Features
Min. nozzle temperature
190 °C
Max. Nozzle Temperature
240 °C
Min. bed temperature
20 °C
Max. bed temperature
60 °C
Minimum recommended print speed
50 mm/s
Maximum recommended print speed
350 mm/s
Maximum recommended print speed
Over 300 mm/s
Number of pcs per pack
Number of pieces in package
1 pc(s)
All parameters
| Code: | FFfpla100 |
| Warranty: | 24 months |
| Links: | Producer's Website: |