CyberPower CP1500EIPFCRM1U
CyberPower CP1500EIPFCRM1U
The CyberPower CP1500EIPFCRM1U backup power supply delivers a real power output of 900W and an apparent power of 1500VA to protect server and network equipment. This line-interactive UPS in a compact 1U rackmount design operates with an output voltage of 230V and achieves a high efficiency of up to 98% at half load. With its pure sine wave output, this power supply reliably protects sensitive electronics, servers, and network components from power outages and voltage fluctuations. It offers a backup time of 84 minutes at full load and up to 558 minutes at half load, providing ample time for a controlled system shutdown.
Key features of the CyberPower CP1500EIPFCRM1U backup power supply
- Equipped with 6× IEC C13 sockets
- Designed for mounting in a 1U rack
- Features an LCD display and AVR function
- Input connector is an IEC C14 type
- Recharge time to 90% capacity is 8 hours
- Surge protection absorbs 450J of energy
- Fanless design ensures quiet operation
Power and supply stability
The line-interactive topology ensures a stable output voltage even when the input supply fluctuates. The Automatic Voltage Regulation (AVR) function corrects mains power fluctuations without switching to the battery, thereby extending its lifespan. Use the pure sine wave output to power devices with electronics sensitive to power quality, including components with active Power Factor Correction (PFC).
Efficiency and operation of the CyberPower CP1500EIPFCRM1U backup power supply
Thanks to its GreenPower UPS technology, this power supply reduces its own energy consumption and increases operational efficiency. The high-capacity batteries provide enough time to safely shut down systems or bridge short-term power outages. Hot-swappable batteries support continuous protection without needing to shut down connected devices. The typical recharge time to 90% capacity is 8 hours.
Protection and clear management
The power supply protects connected devices from surges on the RJ-45 data line, supporting transfer speeds of up to 1Gb/s. The colour LCD panel clearly displays the status of the power, battery, current load, and any warnings. Remote management and monitoring are handled by the PowerPanel Management software. For advanced integration, you can optionally use an SNMP/HTTP management card.
Backup power supply design and connectivity options
The device is designed for rack mounting, where it occupies 1U of height. Its short-depth design optimises space and simplifies installation in rack cabinets. The fanless operation is practically silent. The backup power supply offers six IEC C13 output sockets. These are divided into four with battery backup and surge protection, and two with surge protection only. USB and Ethernet ports are available for communication with external devices.
Technical specification
- Frequency bands: 50–60Hz
- Ports: 6× IEC C13, USB, Ethernet
- Operating temperature: 0–40°C
Specifications
Performance
Efficiency
Backup time
Output type
For rack
Features
Dimensions
Weight
| Code: | CyberP26002 |
| Warranty: | 24 months |
| Links: | Producer's Website: |
| Manufacturer information |
Cyber Power Systems, B.V., Flight Forum 3545, 5657 DW Eindhoven, Netherlands, [email protected], +31-(0(40-234-8170 
|