Cooler Master V8 ACE 3DHP AMD
Cooler Master V8 ACE 3DHP AMD
The Cooler Master V8 ACE 3DHP CPU cooler for AMD is an air cooling system designed for AMD AM4 and AM5 sockets. The device uses a single-tower design with a hybrid system of six heat pipes and two fans, ensuring excellent heat dissipation even under intense loads. The overall dimensions of the cooler are 167.3×138.95×136.47mm. The entire system provides cooling performance comparable to larger dual-tower coolers while maintaining more compact dimensions and a lower weight of 1169g, which makes installation much easier and ensures trouble-free system operation.
Key features of the Cooler Master V8 ACE 3DHP AMD CPU cooler
- Air cooler designed specifically for AMD AM4 and AM5 sockets
- Patented 3DHP technology with six heat pipes for efficient heat dissipation
- Two pre-installed fans generate high static pressure
- Loop Dynamic Bearing bearings ensure smooth operation and long lifespan
- Automatic speed control with a maximum of 2500RPM for the front fan
- Maximum airflow reaches 152.23m³/h with noise levels up to 37dB(A)
- Sliding fan side clips provide clearance for memory modules up to 45mm tall
Groundbreaking cooling
The Cooler Master V8 ACE 3DHP CPU cooler for AMD uses patented 3DHP technology, which adds a third branch pointing directly to the thermal center of the processor to the traditional design. Two 3DHP pipes complement four SCCHP pipes that distribute the captured heat into the aluminium fins. The design covers key high-temperature areas that conventional U-shaped pipes can miss, accelerating overall heat transfer away from the processor.
High cooling surface utilisation
Thanks to its advanced hybrid heat-pipe architecture, the Cooler Master V8 ACE 3DHP CPU cooler for AMD achieves over 95% fin utilisation, representing an increase from approximately 70% in conventional designs. Heat spreads evenly across the entire surface of the aluminium heatsink, eliminating hot spots and maintaining stable temperatures during prolonged loads.
Optimised airflow
Air intake is handled by a 120×120×30mm front fan operating at speeds of 0–2500RPM, which generates a static pressure of 3.85mm H₂O to push air through the dense finning. A 120×120×30mm rear fan with reverse blades operates at 0–2050RPM to help smoothly pull hot air out.
Loop Dynamic Bearing bearings
Both pre-installed 120mm fans utilise Loop Dynamic Bearing bearings, which reduce internal friction and vibrations. The fan blades are made of a liquid crystal polymer exhibiting twice the structural strength, making them highly resistant to deformation at high speeds.
Acoustic system stability
The differing speeds of the front (2500RPM) and rear (2050RPM) fans intentionally prevent unwanted acoustic resonance, as the fans do not amplify the same frequencies. The Cooler Master V8 ACE 3DHP CPU cooler for AMD delivers an airflow of up to 152.23 m³/h at maximum load while keeping noise levels below 37dB(A).
Flat base and compatibility
The cooler base has a flat profile optimized specifically for the integrated heat spreader on processors in AMD AM4 and AM5 sockets. The design with sliding fan side clips allows you to slide the fans up and down without disassembly, ensuring compatibility with memory modules up to 45mm tall.
Format:
120mm
Speed:
0–2500RPM
Voltage:
12V
Speed control:
Automatic speed control
Airflow:
152.23m³/h
Maximum noise level:
37dB
Backlight colour:
No backlight
Bearing type:
Loop Dynamic Bearing (LDB)
Specifications
Backlight
Fan speed
Technical specification
Socket
Heatpipe
Dimensions
| Code: | CCv8a3a1 |
| Warranty: | 72 months |
| Links: | Producer's Website: |